Performance Parts

GAUGE; WATER PRESS; 2 5/8in.; 35PSI; MECHANICAL; MARINE SILVER

• UV Protected Paint On Dial Pointer
• Incl. Mounting Hardware/Instructions
• 12 Month Limited Warranty

GAUGE; WATER PRESS; 2 5/8in.; 35PSI; MECHANICAL; MARINE WHITE

• UV Protected Paint On Dial Pointer
• Incl. Mounting Hardware/Instructions
• 12 Month Limited Warranty

GAUGE; WATER TEMP; 2 1/16in.; 100-250deg.F; ELECTRIC; COBRA

• Perfect Upgrade For Your Car
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

GAUGE; WATER TEMP; 2 1/16in.; 140-280deg.F; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

GAUGE; WATER TEMP; 2 5/8in.; 120-240deg.F; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

G/Stock 2-1/8" Exhaust Gas Tempature Gauge

• Small 2 1/8" hole size
• Push button calibration
• Completely electric

G/Stock 2-1/8" Transmission Temperature Gauge

• G-Stock
• Stainless Low Step Bezel
• Curved Glass Lens

G/Stock 2-1/8" Volt Gauge

• G-Stock
• 2 1/8" Volt Gauge
• Curved Glass Lens

G/Stock 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration

G/Stock 2-5/8" Exhaust Gas Tempature Gauge

• Easy to read 2 5/8" size
• Completely electric
• Push button calibration

G/Stock 3" Ultimate Speedometer Gauge

• G-Stock
• Stainless Low Step Bezel
• Curved Glass Lens

G/Stock 5" Speedometer Gauge (200 KPH)

• G-Stock
• Stainless Low Step Bezel
• Curved Glass Lens

G/Stock Stock Eliminator Temperature Gauge

Quality, Service and Value are not new to us.

HANDHELD ELECTRICAL SYSTEM ANALYZER W/40 AMP LOAD

• Hand-Held Battery Tester

HANDHELD ELECTRICAL SYSTEM ANALYZER W/40 AMP LOAD/PRINTER

• Hand-Held Battery Tester

Hardened Lash Cap w/ 3/8" Valve Stem, .190" Head Height

Includes 1 Hardened Lash Cap: 5/16 Stem Size, .190" Head Height, .080" Thickness.

Hardened Steel Set of 12 - 7 Degree, 5/16", Single Groove Street Locks

Hardened Steel 7& deg

Hardware Kit LT4 Dry Accessory Drive Systems

• Genuine Holley Quality Parts

Hardware Mounting KIT-5 Screws

Hardware Mounting Kit 5 Screws

Header Flange Ford Oval 429-460

Patriot Exhaust H7850 Header Flange Pair Ford 429-460 Tube Diameter 2" Oval Port

Heater Hose End Fitting - 90° with 1/2" NPT and 3/8" Barb

Edelbrock part #8169 heater hose end is designed to hold up to any plumbing task you have.

Heater Hose End Fitting - Straight with 1/4" NPT and 3/8" Barb

Edelbrock part #8191 heater hose end is designed to hold up to any plumbing task you have.

Heater Hose End Fitting - Straight with 3/8" NPT and 3/8" Barb

Edelbrock part #8118 heater hose end is designed to hold up to any plumbing task you have.

Heat Shrink Sleeve Wire Markers Black

• Color: Black
• Use on 7, 8, 9 and 10.4mm wire
• 2 sets of numbers, 1 through 8; enough for both ends of each wire

Hemi Tubes, Red

MSD worked closely with Top Fuel racers to design our Hemi Tubes.