Performance Parts

High-Flow

The Edelbrock High-Flow EFI Intake Elbow #3815 is intended for very high-power naturally aspirated EFI applications and turbocharged or centrifugal-supercharged engines making over 1,100 horsepower.

High Output Data Splitter 6-Way Hub

• Includes 6 data input pigtails.

High Vacuum Cam Seal

COMP Cams' part number 6200VCS, High Vacuum Cam Seal for 6200/6300 Belt Drive Kits

Hi-Tech 10.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 10.350" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 210 Radius 8.000" Long, .080" Wall, 3/8" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 210 Radius 8.100" Long, .080" Wall, 5/16" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 6.250" Long, .105" Wall, 5/16" Diameter Pushrod

Hi-Tech 7.750" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 9.400" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 6.900" Long, .080" Wall, 5/16" Diameter Pushrod

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Hi-Tech One-Piece 7.900" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.650" Long, .135" Wall, 3/8" Diameter Pushrod Set

37% stiffer than standard .080" wall pushrods.

Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 3/8" Rocker Thread

3/8 HI-Tech Stud

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16 HI-Tech Stud

Hi-Temp Shrink Tubes 6mm x 200' 010838B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hose Separator

• 6061-T6 Aluminum
• Blue Anodized
• Fits 8 AN ProClassic Hose

Hose Separator

• 6061-T6 Aluminum
• Fits 12 AN ProClassic Hose
• Red Anodized

Hose & Tubing Separator

• For Professional Engine Look

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Brake Pressure Gauge

• Small 2 1/8" hole size
• Completely electric
• Pushbutton calibration

Hot Rod 2-1/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Completely electric
• Small 2 1/8" hole size