Tuning & Engine Management

GAUGE; FUEL ECONOMY; 2in.; RPM/MPH/INST/AVG MPG; DIGITAL; OBDII; ECOMETER II

• Compatible With Most Gasoline ODBII Equipped Vehicles From 1996 To Present
• Displays RPM; Speed; Instant MPG And Average MPG
• Installs in Minutes

Coolant Temperature Sensor for Pro-Flo and E-Street Systems

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems.

Oxygen Sensor for Pro-Flo 1 EFI, Bosch 3-Wire, Narrow-Band

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems.

Sensor Docking Station w/Pyrometer Probe

• Sensor Docking Station

USB CABLE AND STRAIN RELIEF KIT

Auto Meter has been driven to provide performance enthusiasts with the information they need to win.

OBD-II Splitter Cable

• Plug and Play
• OBDII connection
• Great addition

Dodge Cummins Unlock Cable

• Unlock Cable

DeskTop Dyno5 Software

DeskTop Dyno 5

Ethanol Content Flex Fuel Sensor Kit (3/8" Barb)

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

Pro-Flo Multi-Point Replacement Calibration Module

The Edelbrock 3519 is a new calibration module that will be a replacement or service part for any Pro-Flo kit.

FAE Wideband "Replacement" Sensor

• Replacement for 0300 with 0400 serial number
• Improved durability compared to Bosch 4.9.
• Faster response time.

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported

6 Channel CAN Module

• Two (2) dedicated 0-5V analog inputs
• One (1) tachometer/coil input
• Protected inputs

VCU275 Programmable Electric Vehicle Control Unit

• Full Integration of all EV sub-systems under one controller
• Accessory control of cooling pumps, cooling fans, lights and more
• Supports up to 2 Drive Motors and up to 1200V AEM BMS18 Systems

X-Series AEMnet Can Bus Gauge Kit

• User selectable units of measurement (US or Metric)
• User selectable wideband measurements (AFR or Lambda)
• Compatible with 16v vehicle systems

7 BAR Stainless Steel MAP Sensor Kit

• Accurate with 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter.
• Weather resistant connector and pins included

Dynomation-5 Wave Action Engine Simulation Software

Look inside a running engine, and learn where and how it makes power with Dynomation-6 Wave Action Simulation.

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

GAUGE; WATER TEMP; 2 5/8in.; 120-240deg.F; LIQUID FILLED MECH; PRO-COMP

• Mechanical Instruments Provide Unmatched Accuracy
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

3.5 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

5ft. HDMI and Power wire extension kit

• HDMI Cable
• 20 Gauge Power Wire
• Butt Connector For Power Wire Extension

Manifold Absolute Pressure (MAP) Sensor for First Generation Pro-Flo Systems)

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems.

Power Grid Power Module - Red

• Takes the place of 4 electromechanical relays
• Available in Red (P/N 7764) or Black (P/N 77643)
• Built-in overcurrent protection, no fuses needed

GAUGE; PRESSURE; 2 5/8in.; 300PSI; LIQUID FILLED MECH; PRO-COMP

• Mechanical Instruments Provide Unmatched Accuracy
• No Electrical System Required For Gauge Operation
• Incl. Mounting Hardware/Instructions

GAUGE; WATER TEMP; 2 1/16in.; 120-240deg.F; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions