Engine Sensors

SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender
• Thread Size - 1/8 In. NPTF
• 2 in. Diameter

100 PSIg Brass Sensor Kit

• Brass sensors accurate to within 3% of full scale (pressure sensors)
• Connector and pins included
• Analog data scaled across full 100 PSI

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

SPE-8711 Vacuum Sensor Adapter Kit

• Attach vacuum lines almost anywhere on intake tube
• Fits all popular vacuum lines and air sensors
• 2 hole saws: 5/8 inch and 7/8 inch

Oxygen Sensor for Pro-Flo 1 EFI, Bosch 3-Wire, Narrow-Band

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems.

7 BAR Stainless Steel MAP Sensor Kit

• Accurate with 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter.
• Weather resistant connector and pins included

150 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

Ethanol Content Flex Fuel Sensor Kit (3/8" Barb)

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

3.5 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

FAE Wideband "Replacement" Sensor

• Replacement for 0300 with 0400 serial number
• Improved durability compared to Bosch 4.9.
• Faster response time.

SENSOR; O2; REPLACEMENT; WIDEBAND AIR/FUEL

• Wide Band O2 Censor

2000 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter included
• Weather resistant connector and pins included

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

Atomic, O2 Sensor Wideband

Atomic EFI Support Component

EAS Pressure Sensor - 0-100 psi

• 0-100 psi capable
• Easy setup through EAS
• Compatible with CTS2/CTS3

500 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

5 BAR Stainless Steel MAP Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

Air Temperature Sensor for Push-in Connections

The Edelbrock #3578 Air Temp Sensor is for push in connections.

Air Temp Sensor Kit

• Weatherproof connector
• Connector and pins included
• Temp scale of -20C to 150C / -4F to 302F

MAP Sensor 3-bar for blown/turbo applications

• Applications up to 30lbs of boost.

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

2 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• 1/8"NPT to -4 AN adapter and barbed fitting included
• Weather resistant connector and pins included

SENSOR; FUEL PRESSURE; 0-100PSI; 1/8in. NPT MALE

• Built In Connector Mates To Delphi Packard Metri-Pack
• 150 Series Connector [12065287-Not Included]

SENSOR; FUEL PRESSURE; 0-15PSI; 1/8in. NPT MALE

• Built In Connector Mates To Delphi Packard Metri-Pack
• 150 Series Connector [12065287-Not Included]