Fuel Systems

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 240 ohms empty, 33 ohms full

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 30 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• 75 ohms empty, 10 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Line - Chrome

• Chrome Plated Steel
• Easy Installation
• 3/8" NPT Inlet

Fuel Line Kit

• Centerline to centerline = 9.5

Fuel Line Kit with Gauge & Fittings - Chrome

• Features a 1-1/2" diameter fuel pressure gauge
• Gauge reads in 1/2 lb. increments from 0 – 15 lbs
• Inverted flare female inlet thread size 5/8" - 18

Fuel Line Kit with Gauge & Fittings - Chrome

• Chrome Plated Fuel Line
• Comes With 0 To 15 psi fuel pressure Gauge
• Hose Barb Fits 3/8" Fuel Hose

Fuel Pressure Regulator

Edelbrock Fuel Pressure Regulator #3584 for Pro-Flo 2 and Pro-Flo XT EFI systems.

Fuel Pressure Regulator Diaphragm Kit

Replacement GFLT diaphragm with spring for alcohol applications.

Fuel Pressure Regulator Kit - Single Regulator Plate Only, Standard Flange

This Edelbrock Fuel Pressure Regulator plate #8192 is designed for standard flange Holley carburetors.

Fuel Psi Adapter

• 6061-T6 Aluminum
• Precision Machined

Fuel Psi Adapter

• 6061-T6 Aluminum
• Precision Machined

Fuel Psi Adapter

• 6061-T6 Aluminum
• Precision Machined

Fuel Pump

• Universal design fits most applications
• Eliminates vapor lock and flooding
• For use with 5/16 inch fuel lines

Gas Jet Extension

Gas Main Jet Extension (1/4") - Sold in pairs - Comes with replacement non-stick fuel bowl gasket

Gasket Set for Performer and Thunder Series Carbs

The Edelbrock #1472 Gasket set is a complete set of gaskets for the EPS, AVS and AVS II series of Edelbrock carburetors.

Hard Core Gray Aluminum Center Hung "V" Bowl Kit

• Clear, glass sight window for easy, safe fuel level adjustments
• Aluminum construction with Hard Core Gray (black anodized) finish
• Weighs approximately .60lb less than its zinc counterpart

Heat Insulator Gaskets for Edelbrock Dual-Quad Manifolds - 0.125" Thick (Qty 2)

The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 are designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures.

High Flow In-Tank Fuel Pump

• Maintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)
• Highly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI
• Both models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet

High Flow Needles and Seats - .110"" (Qty 2)

The Edelbrock #1466 High Flow Needle and Seats includes a pair of needles and .110" seats.

HP Main Body Retro Fit Kit

• All Necessary Parts Are Included
• Simple Installation With Common Hand Tools
• Eligible For Holley Contingency Programs

HYDRAMAT (3X8) 19MM Offset

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings