Fuel Systems

Fuel Level Sender

Quality, Service and Value are not new to us.

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 30 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• 75 ohms empty, 10 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 75 ohms empty, 10 ohms full

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 75 ohms empty, 10 ohms full

Fuel Level Sender

• 10 ohms empty, 180 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 10 ohms empty, 180 ohms full

Fuel Level Sener Gasket - 5-Bolt

Fuel Gasket

Fuel Line Kit

• Centerline to centerline = 9.5

Fuel Pressure Regulator Rebuild Kit (Carbureted Applications)

Edelbrock part #178040 Carbureted Diaphragm & Hardware Rebuild Kit (for use with #174051, #174052, #174053, #174081 & #174103)

Fuel Pump Safety Pressure Switch

• Safety pressure switch that reads oil pressure
• Will shut off fuel pump when oil pressure drops below 5 psi
• Includes detailed instructions

Fuel Rail Stands for Pico Injectors

The Edelbrock #3619 Fuel Rail Spacer Kit includes 'U-shape' brackets that are the proper height (1.37) for mounting Pico-style (1.50" O-ring Spacing) fuel injectors to any of our Victor EFI style intake manifolds

Fuel Supply System

• Incl. Edelbrock Fuel Pressure Regulator PN" "1727" "
• Includes Edelbrock Electric Fuel Pump PN" "1792" "

Gas Jet Assortment Kit #75 thru #110 (2 ea.)

Gas Jet Assortment Kit 75 thru 110 - Comes with (2) each of the following numbers.

Hand Adjustable Throttle Stop Screw

• Genuine Holley Quality Parts

High Volume Fuel Rail Banjo Fitting With Hole

• Sold each
• black anodized finish
• Fuel rails are sold separately

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

Intake Manifold Spacer

• Cast Aluminum
• Dominator To Square Bore
• 2 1/4" Height