Fuel Tanks & Senders

SENSOR; FUEL LEVEL; ADJUSTABLE; 240 OHM EMPTY TO 33 OHM FULL; SWING-ARM TYPE

• For 240 Ohm Empty/33 Ohm Fuel Gauge Models
• Adjustable for 5 - 24 In. Deep Tank
• Fits Standard SAE 5 Hole Top Mounting Flange

SENSOR; FUEL LEVEL; ADJUSTABLE; 240 OHM EMPTY TO 33 OHM FULL; SWING-ARM TYPE

• Marine Fuel Level Sensor

11" x 11" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

17-1/4" - 18-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

20-1/4" - 21-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

20-1/4" - 21-1/4" Deep Tank (0-90 Ohm)

Quality, Service and Value are not new to us.

24" x 15" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

2.5" x 8" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

30" x 14" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

Aluminum Fuel Cell 5 Gallon

• 5-bolt fuel sender block-off plate can be removed and a fuel gauge tube level sender can be installed

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 240 ohms empty, 33 ohms full

Fuel Level Sender

Quality, Service and Value are not new to us.

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 240 ohms empty, 33 ohms full

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES

• 3 Push Buttons w/LED Display For Easy Set Up
• Low Fuel Level Warning At 10 Percent
• 8 Pre-Programmed Resistance Ranges

Hardware Mounting KIT-5 Screws

Hardware Mounting Kit 5 Screws

14-1/4" - 15-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 8" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

17-1/4" - 18-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (0-90 Ohm)

Quality, Service and Value are not new to us.

18-1/4" - 19-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.