Fuel Tanks & Senders

3" X 15" HydraMat®, Rectangle

• The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Replacement HydraMat for Retro-Fit fuel modules; 12-130, 12-131, 12-132 and 12-133

3" X 8" HydraMat®, Rectangle Offset Outlet

• The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
• Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump

15" x 3" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

ADAPTER PLATE; FOR 5 BOLT FUEL LEVEL SENSOR TO 6 BOLT MOUNTING FLANGE

• Made From 6061 Aluminum
• Raw Finish
• Outer Bolt Circle 2.75 In.

11" x 11" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES

• 3 Push Buttons w/LED Display For Easy Set Up
• Low Fuel Level Warning At 10 Percent
• 8 Pre-Programmed Resistance Ranges

HydraMat® Install Magnet Kit

• Magnet with integrated mounting stud
• Easy installation
• Kit includes 4 magnets, nuts and washers

15" x 8" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 8" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-Cycle oil blends as high as 20:1
• Not for use with diesel fuels

HydraMat® Install Magnet Kit

• Magnet with integrated mounting stud
• Easy installation
• Includes 4 magnets, nuts and washers

Adjustable Universal EFI Sump Fuel Kit - 67gph (35-90 psi)

The Universal Fuel Sump Kit #36031 includes everything needed for a complete installation and is designed to provide the necessary high fuel pressure required for EFI applications in vehicles equipped with an existing low-pressure carbureted fuel system.

Replacement Fuel Gauge Sender 5/10 Gallon

• Standard SAE 5-bolt mounting pattern
• Tube design acts a damper for consistent readings
• Save space and eliminate need for a float arm

Replacement Fuel Gauge Sender 15/20 Gallon

• Standard SAE 5-bolt mounting pattern
• Tube design acts a damper for consistent readings
• Save space and eliminate need for a float arm