Forced Induction

V3 Water/Methanol HD Injector Kit

• Better Atomizing design
• T-Adapter included to run dual nozzles
• Inject up to 2000cc

V3 Water/Methanol Injection Kit

• 20 ft. of high-pressure nylon injection tubing
• CONTROLLER FEATURES:
• Integrated fuse and mounting tabs

TUBING; COPPER; 1/8in.; 6FT. LENGTH; INCL. 1/8in. NPTF BRASS COMPRESSION FITTING

• Copper Tubing
• 6 ft. Line Length

V3 Water/Methanol HD Controller Kit

• 40PSI rated HD controller.
• Color coded harness for ease of installation.
• System status LED on controller.

Boost Control Solenoid Kit

• Solenoid muffler included
• Fast response solenoid
• 120 PSI MAX Pressure

Water/Methanol Solenoid

• 2 wire connection
• Backwards compatible with AEM Water/Methanol Controllers
• Push lock fittings

Water/Methanol Injection Inline Filter

• Filters up to 40 microns.
• Protects the system from foreign particles.
• Comes with 1/4" push lock fittings.

TUBING; NYLON; 1/8in.; 10FT. LENGTH; INCL. 1/8in. NPTF BRASS COMPRESSION FITTING

• 10 ft. Hose Length
• Burst Pressure 1000PSI
• Incl. Compression Ferrules

Coupler

• Fits 2.5 to 2.75 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Coupler

• Connects 2-1/4 inch diameter tubes
• 3 inches long
• Connects tubing to fit custom applications

Coupler

• Connects 2-1/2 inch diameter tubes
• 3 inches long
• Connects tubing to fit custom applications

Coupler Reducer

• Connects from a 2.5 to a 2.75 inch diameter tube
• 3 inches long
• Constructed from durable reinforced silicone

4.125" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15826 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

45-Degree Transition Coupler, Black, Silicone, 2.50in to 2.75in

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

90-Degree Silicone Transition Coupler, 2.00-in to 2.25-in, Black

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

90-Degree Transition Coupler, Black, Silicone, 3.00in to 3.75in

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

Coupler Reducer

• Connects from a 3 to a 3.25 inch diameter tube
• 3 inches long
• Constructed from durable EPDM rubber

Onyx Series Turbo Shield/Blanket GEN-3 T22 Shield

• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Barrier layer of fine stainless mesh.

TUBING; NYLON; 1/8in.; 12FT. LENGTH; INCL. 1/8in. NPTF BRASS COMPRESSION FITTING

• 12 ft. Hose Length
• Burst Pressure 1000PSI
• Incl. Compression Ferrules

Turbo Fitting

• Made In The USA
• Sold Individually
• Zinc Plated Steel

Coupler

• Connects 2-3/4 inch diameter tubes
• 3 inches long
• Connects tubing to fit custom applications

Coupler

• Connects 3 inch diameter tubes
• 3.5 inches long
• Connects tubing to fit custom applications

Coupler

• Fits 3 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Coupler

• Fits 2.75 to 3 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Coupler

• Fits 3.25 to 3.5 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Coupler Reducer

• Connects from a 2.75 to a 3 inch diameter tube
• 3 inches long
• Constructed from durable EPDM rubber

Coupler Reducer

• Connects from a 4 to a 3.5 inch diameter tube
• 3 inches long
• Constructed from durable EPDM rubber

Dual Pass/Single Row Universal Heat Exchanger (20"W/8"H/2"D) 20,500 BTU

Edelbrock heat exchanger part #15549 is a dual pass/single row design and delivers 20,500 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting and includes brackets.

Hose; Hump 2.5"/3" X 3"

• Fits 2.5 to 3 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

SEAL & GASKET KIT

• *Gasket and Seals, 6-71 Super Charger/Blower, Chevy, Big/Small Block, Kit

Steel Olive Hardline Tubing

• Ideal for Use on All Automotive Hardline Applications

Turbo Fitting

• Blue Anodized
• Made In The USA
• Male -10AN

V3 Water/Methanol Injector Kit

• Innovative design that increases atomization
• Interchangeable Pintle to inject between 250cc-1000cc
• Faster cooling using unique Swirl Generator technology

V3 Water/Methanol Multi-Input Controller Kit

• Multiple triggers to activate system.
• LED system status light
• Can be used on NA and boosted applications.

V3 Water/Methanol Standard Controller Kit

• Color coded harness for ease of installation.
• Integrated fuse.
• System status LED on controller.

Water/Methanol 3/8" NPT Pump

• up to 200 PSI
• Flows 1 Gallon per minute
• Directional flow

Annealed Stainless Steel Tubing

• Shipped in Straight Lengths Only

Dual Pass/Single Row Universal Heat Exchanger (34"W/14"H/2.25"D) 44,600 BTU

Edelbrock heat exchanger part #15569 is a dual pass/single row design and delivers 44,600 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting.

Easy Form Hardline Tubing

• Can be Polished to Shiny Copper Finish

Easy Form Hardline Tubing Kit

• Tube Nuts Included: (10) 3/8"-24, (2) 7/16"-24, (2) 9/16"-18, (2) 1/2"-20

SPH Bayonet Locking Dry Break

• High durability & dependability

Straight Coupler, Red, Silicone, 2.00in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

Straight Coupler, Red, Silicone, 2.50in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

Straight Coupler, Red, Silicone, 2.75in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

Straight Coupler, Red, Silicone, 3.00in

• 100% silicone construction
• Heat-resistant embedded fibers
• Mishimoto Lifetime Warranty

Straight Transition Coupler, Black, Silicone, 0.875in to 1.125in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

Supercharger Kit, Universal TVS Head Unit, R2650 Front Drive, Front Inlet

Edelbrock E-Force Supercharger systems are available for carbureted and fuel injected applications, as well as engineered and manufactured by Edelbrock and feature an Eaton庐 rotor assembly.

Titanium Turbo Blanket, T3

• Specifically designed for reducing engine bay temperatures in turbocharged vehicles
• Volcanic lava rock outer layer and 96-percent silica fiber inner layer for optimal heat protection
• Rated to 1800F direct heat and 2000F radiant heat

TUBING; NYLON; 1/8in.; 10FT. LENGTH; INCL. FERRULES

• 10 ft. Hose Length
• Burst Pressure 1000PSI
• Incl. Compression Ferrules

Turbo Insulation Kit Universal 010113

• Helps Reduce Turbo Lag
• Protection Up To 1200 Degrees F
• 12 in. x 36 in. Turbo Blanket Material

V3 Naturally Aspirated Water/Methanol Injection Kit

• Includes "Boost Safe" readiness failsafe system
• LED dash light for system status and low fluid warning
• 20 ft. of high-pressure Nylon injection tubing

V3 Water/Methanol HD Kit (No Reservoir)

• Interchangeable nozzles.
• LED system status light.
• HD controller rated up to 40PSI.

V3 Water Methanol Injection Kit

• Includes “Boost Safe” readiness failsafe system
• LED dash light for system status and low fluid warning
• 20 ft. of high-pressure Nylon injection tubing

V3 Water/Methanol Injection Kit

• Can be used on N/A or Forced Induction Applications.
• Kit is universal for installation/application
• Increases horsepower and torque

V3 Water/Methanol Standard Kit (No Reservoir)

• Interchangeable nozzles.
• Comes with fitting for 3rd party tank.
• LED system status light

Water/Methanol 1/4" Push-Lock Hose Pump

• Sealed and weatherproofed unit
• Integrated push-lock hose connection
• High-Flow in a compact package

Water/Methanol Injection 5 Gallon Tank

• Universal and can be used on 3rd party applications.
• Comes with level sensor with flying lead.
• Preinstalled 90° 1/4" push lock fitting.

Water/Methanol Injection Reservoir

• Compact design for various installation options
• Built-in level sensor to warn of low level
• Large reservoir cap to help with refill

Water Methanol Reservoir Cap

• Direct replacement for either AEM 1.15 and 5-gallon reservoir
• Ridged design to help prevent slipping when taking cap on and off
• Wide cap for easy refills

142 Supercharger to Manifold Gasket

Supercharger Gasket Supercharger To Manifold 142

144 Powercharger Blower Manifold Gasket

• Blower Manifold Gasket

177 Supercharger to Manifold Gasket

• Gasket

2.625" 8-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

Edelbrock 2.625in. part #15870 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

2.65" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15814 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

2.75" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15823 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

2.75" 8-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

Edelbrock 2.75in. part #15871 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.00" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15822 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.00" 8-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

Edelbrock 3.00in. part #15872 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.25" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15821 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.25" 8-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

Edelbrock 3.25in. part #15873 pulley allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.50" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15820 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.75" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15825 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.875" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15824 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

45-Degree Coupler, Black, Silicone, 1.50in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

45-Degree Coupler, Black, Silicone, 1.75in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances