Engine Components

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Retard Module Kit, 1,2,3,4,5 Degrees

MSD Retard Module Kits give you a full selec­tion of retard modules to be used with your Tim­ing Controls.

Set of 16 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

These Steel Super Locks with .050 install height feature a lash cap recess, 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 16 Metal Body Viton Valve Seals for .500" Guide Size, 5/16" Valve Stem

5/16 X .500 Viton Metal Body Seal .546 OD

Stud Girdle Adjusting Nut for 7/16" Stud w/ Snap Ring

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Three Stage Retard Control

• Twenty-five degrees start retard
• Three separate retards

Turbocharger Oil Flange Fittings

• These Fittings are Made from 2024 Aluminum w/ Black Anodized Finish & 303 Stainless Steel

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Valve Spring Shim Kit - 1.437" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.480" OD, .765" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

7 Steel Retainer Set of 16 for for 11/32 Valve w/ 26925 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Hi-Tech 7.700" Long, .105" Wall, 5/16" Diameter Pushrod Set

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock featuring a lash cap recess, 10& deg

10 Degree, 11/32", Single Groove Lock w/o Lash Cap Recess

This Steel Super Lock without a lash cap recess features a 10& deg

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock with lash cap recess features a 10& deg

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.625" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set 16 for 1.625" OD Triple Springs,+.050" Height over 739

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 26120 Beehive Spring

Upgrading to these 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

DUAL SPRING W/ DAMPER, 1.519 OD, 1.900 IH, .800 LIFT, 376 LBS/IN

COMP Cams' new 26924 dual valve springs are a product of innovative design and superior craftsmanship.