Engine Components

ROCKERS, CS 1.5 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

10 Degree Steel Retainers for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1 Metal Body Viton Valve Seal for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

7 Degree Steel Retainer Set of 16 for 3/8" Valve w/ 1.437"-1.500" Spring

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

Dual Valve Springs with Damper, 1.555 OD, 1.950 IH, .760 Lift, 501 LBS/IN, HR

COMP Cams' new 26094 dual valve springs are a product of innovative design and superior craftsmanship.

Dual Valve Spring with Damper, 1.560 OD, 1.950 IH, .760 Lift, 500 LBS/IN, SR - Set

COMP Cams' new 26953 dual valve springs are a product of innovative design and superior craftsmanship, with a lineage back to NASCAR competition.

Endure-X Solid Roller Lifter w/ .904" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .210" right offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Engine Valve Spring Kit

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Exhaust Valve for #60779 & #60179 Cylinder Heads

The Edelbrock #9367 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

High Energy 7.266" Long, 5/16" Diameter Pushrod Set

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 8.152" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech Polylock Set for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

LS Accessory Drive Bracket - Installation Kit for Long Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

Race Extreme 1.683" OD Triple Springs; 2.100" Installed Height; 16 Springs

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 Metal Body Viton Valve Seals for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Set of 16 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Xlong Dowel Pins Chevy Sb And Bb

2" Long pins are a necessity for any application running a mid-mount plate

7 Titanium Retainer Set of 16 for 26921 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

DUAL SPRING W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR