Engine Components

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

High Energy 7.266" Long, 5/16" Diameter Pushrod Set

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 8.152" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech Polylock Set for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

Low-Mount LS Accessory Drive Bracket - Passenger's Side A/C Bracket

• Small Compact Accessory Brackets & Complete Kits
• Cost Effective Solution
• Also works on LSA supercharged engines

LS Accessory Drive Bracket - Installation Kit for Long Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

These Steel Super Locks with .050 install height feature a lash cap recess, 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 16 Metal Body Viton Valve Seals for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Set of 16 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Set of 16 PTFE Valve Seals for .500" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

7 Steel Retainer Set of 16 for for 11/32 Valve w/ 26925 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer Set of 16 for 26921 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

DUAL SPRING W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

High Energy 6.248" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 8.100" Long, .105" Wall, 5/16" Diameter Pushrod Set

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Replacement Pivot Ball Set for Magnum Rockers w/ 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock with lash cap recess features a 10& deg

10 Lightweight Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer Set of 16 for 1.625" OD Double Springs

Upgrading to these 10& deg