Engine Components

Machined Steel Set of 16 - 7 Degree, 11/32", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Set of 16 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

Dual Valve Spring with Damper, 1.442 OD, 1.800 IH, .600 Lift, 391 LBS/IN, FT/HR - Set

COMP Cams' new 26987 dual valve springs are a product of innovative design and superior craftsmanship.

Replacement Valve Stem Oil Seal Kit

Edelbrock part #9758 Valve Seal kit is a replacement valve seal kit for all Edelbrock Performer & Performer RPM heads, except Ford FE.

Hi-Tech 6.950" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

ID Spring Locator Set of 16 - 1.500" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

Check Valve

• Unaffected By Most Lubes

Dual Valve Spring 1.560 OD, 1.900 IH, .740 Lift, 550 LBS/IN, Superfinsh

COMP Cams' new 26943 dual valve springs are a product of innovative design and superior craftsmanship.

Hi-Tech Polylock for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Hi-Tech Polylock for 7/16" Stud Ultra Pro Magnum Rockers

7/16 HI-Tech Poly Lock

Hi-Tech Polylock Set for 7/16" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Installation Kit for Low LS Accessory Drive Bracket w/ Long Alignment

• Light weight cast aluminum
• Provides proper belt alignment
• Works with multiple applications

Retard Module Selector, 0°-11°

The Retard Module Selectors allow you to select between 12 retard amounts with the turn of a dial.

Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

SINGLE SPRING W/ DAMPER, 1.486 OD, 1.850 IH, .650 LIFT, 410 LBS/IN, HR

Stud Girdle Adjusting Nut for 3/8" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Valve Spring Shim Kit - 1.250" OD, .814" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.480" OD, .765" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Engine Valve Spring

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Hi-Tech 7.350" Long, .105" Wall, 5/16" Diameter Pushrod Set

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod - Single