Engine Components

Hi-Tech 8.325" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 8.000" Long, .080" Wall, 5/16" Diameter Pushrod

Hi-Tech Oil Restricting 8.000" Long, .080" Wall, 5/16" Diameter Pushrod - Single

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hy-Rev Lifters for Buell, Twin Cam and Sportster

Hy-Rev?

ID Spring Locator Set of 16 - 1.540" OD, .520" ID, .060" Thickness

Magnum 6.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.200" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Replacement Adjusting Nut for Magnum Rockers w/ 10mm Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

ROCKERS, CB 1.6 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

ROLLER LIFTER, CSV-6

Set of 12 Metal Viton Valve Seals for .530" Guide Size, 5/16 Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

Set of 8 Metal Body Viton Valve Seals for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

Set of 8 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

STEEL RETAINERS, EB 1.437"

Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod - Single

UltraPro One Way Check Valve

• Body is Anodized Aluminum

VALVE SPRING, 1.683" DRAG RACE

Set of 16 Drag Race Springs.

VALVE SPRINGS, 1.384" 2 SPRING

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree, 3/8", Single Groove Lock w/o Lash Cap Recess, +.050" Height

Thise Steel Super Lock with +.050 install height features a 10& deg

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Titanium Retainer Set 12 for 1.5"-1.55" OD Double Springs

Upgrading to these 10& deg

10 Degree Tool Steel Retainer Set of 12 for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Degree Tool Steel Retainer Set of 12for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg