Engine Components

TITANM RETAINERS, STD 7DEG (26

Upgrading to these 7& deg

VALVE SPRING, 1.384" 2 SPRING

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

VALVE SPRING, 1.464" OUTER W/D

1.464" OD Single Springs

VALVE SPRING, 1.565" INTER-FIT

1.565" OD Dual Springs

Valve Spring, 1.565"Nascar

VALVE SPRING, 1.683" DRAG RACE

Single Drag Race Spring.

VALVE SPRINGS, 0.970" INNER

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

VALVE SPRINGS, 1.430" OUTER W/

1.269 OD Single Springs

VALVE SPRINGS,1.437"FOR990-975

1.437" OD Dual Springs

Valve Spring Shim Kit - 1.480" OD, .765" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.640" OD, .635" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.250" OD, .814" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit for 352-428

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

7 Degree Tool Steel Retainer Set of 16 for 7245 Dual Conical Springs

COMP Cams Lightweight Tool Steel Retainers provide the best of all valve train benefits: light weight, along with exceptional strength and wear characteristics.

7 Degree Tool Steel Retainers for 11/32" Valve Non-LS w/ Beehive Valve Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Degree Tool Steel Retainers for 26915/26918 Beehive Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Tool Steel Retainer Set of 16, 7mm Valve for 26056 Spring

These new Tool Steel Retainers from COMP Cams have a 7& deg

BOLT, FOR 6100 REAR BELT GUARD

Rear Belt Guard Bolt for #6100 Magnum Belt Drive System

Dual Taper 7.600" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.650" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.750" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.800" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.000" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.050" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.200" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.