Engine Components

PUSHROD, HUSTLER, 5/16 OD X 7.122 X .075

PUSHRODS, HI-TECH 3/8" 8.000"

37% stiffer than standard .080" wall pushrods.

PUSHRODS, HI-TECH GM V-6 5/16

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Race Endurance 1.551" OD Dual Spring; 1.950" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Extreme 1.640" OD Dual Spring; 2.050" Installed Height; 1 Spring

Elite Race Double Valve Springs from COMP Cams have a .750"+ maximum lift and outside diameter of 1.680".

Race Extreme 1.660" OD Triple Spring; 2.000" Installed Height; 1 Spring

Triple Valve Springs from COMP Cams deliver maximum strength, durability and valve train stability.

Replacement Adjuster Screw for Ultra Aluminum ARC Rockers

Ultra ARC Aluminum Series Rocker Arm - Cup Adjuster Screw - Single.

Replacement Pivot Ball for Magnum Rockers w/ 10mm Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

ROCKERS, FS 1.7 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

SET, DUAL SPRING W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

Set of 8 Metal Body Viton Valve Seals for .500" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .546"

Set of 8 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

SET, SINGLE SPRING W/ DAMPER, 1.440 OD, 1.750 IH, .600 LIFT, 350 LBS/IN, FT/HR

Shaft Mount Rocker .480" Wide Spacer for 1074 and 1076 Shaft Rocker System

Spacer for #1074 and #1076 Rockers .480" Wide - SIngle

STEEL RETAINERS, 11/32" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Steel Retainers, 1.375"

COMP Cams' part number 796-16, Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 1.500"-1.550"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod Set

Hi-Tech Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16

Straight 7.450" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.700" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.700" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.750" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 7.800" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.800" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.000" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 8.000" Long, .165" Wall, 7/16" Diameter Pushrod - Single