Engine Components

Hi-Tech Oil Restricting 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Hi-Tech One-Piece 8.280" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 9.650" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Polylock for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylock/Adjusting Nut, 1/2" Stud for Ultra Pro Mangum/Ultra Pro Magnum XD Rockers - Single

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Hy-Rev Lifters for Buell, Twin Cam and Sportster

Hy-Rev?

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness - Single

ID Spring Locator - 1.300" OD, .770 I.D, .100" Thickness - Single

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

LS High-Mount A/C Accessory Drive Bracket - Passenger's Side A/C Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Machined Steel Set of 12 - 7 Degree, 8mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnum 6.750" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.200" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.700" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.900" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.150" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Endurance 1.657" OD Conical Spring; 2.000" Installed Height; 1 Spring

Dual Conical Valve Springs.

Race Extreme 1.683" OD Triple Spring; 2.100" Installed Height; 1 Spring

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Rattler Big Block Chevrolet Billet Timing Pointer for 7.25 inch Balancers

These high-quality timing pointers are CNC-machined from aluminum billet and are black anodized with a laser-etched logo on the front.

Rattler Big Block Chevrolet Billet Timing Pointer for 8 inch Balancers

These high-quality timing pointers are CNC-machined from aluminum billet and are black anodized with a laser-etched logo on the front.

Replacement Timing Chain for 2121, 2108 and 2113 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.