Recent vehicles
Vehicles you shop for show up here. Pick one in the Shop By Vehicle bar below.
Clear current vehicleThese new Tool Steel Retainers from COMP Cams have a 10& deg
Free shipping in Canada, ships in about 2 weeks
Ships in about 2 weeks
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Ships in about 2 weeks
Ships in about 2 weeks
11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"
Ships in about 2 weeks
3/8 x .530" Metal Body Viton Valve Seal
Ships in about 2 weeks
< ul>< li> Fits: 3/8" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>
Ships in about 2 weeks
COMP Cams Lightweight Tool Steel Retainers provide the best of all valve train benefits: light weight, along with exceptional strength and wear characteristics.
Ships in about 2 weeks
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Ships in about 2 weeks
Ships in about 2 weeks
Free shipping in Canada, ships in about 2 weeks
Free shipping in Canada, ships in about 2 weeks
Ships in about 2 weeks
Ships in about 2 weeks
.300" Tall Roller lifter, centered Pushrod seat, cutaway body with oil band, single lifter
Free shipping in Canada, ships in about 2 weeks
The Edelbrock #93663 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.
Ships in about 2 weeks
Includes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg
Ships in about 2 weeks
High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.
Ships in about 2 weeks
High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.
Ships in about 2 weeks
High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.
Ships in about 2 weeks
The Edelbrock high-quality rocker studs #8593 7/16" (Set of sixteen) are used in Edelbrock cylinder heads requiring screw-in studs.
Free shipping in Canada, ships in about 2 weeks
Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg
Free shipping in Canada, ships in about 2 weeks
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.
Ships in about 2 weeks
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.
Ships in about 2 weeks
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.
Ships in about 2 weeks
