Engine Components

Set of 100 - 10 Degree 3/8" Single Groove Locks w/o Lash Cap Recess +.050" Height

• Super-Tough - 10 Degree Super Locks greatly reduce the chance of "pull-through" failure in high load applications.…
• COMP Super Locks are machined from fatigue resistant alloy material.

Set of 12 Hardened Lash Caps w/ 11/32" Valve Stem, .210" Head Height

Includes 12 Hardened Lash Caps: 11/32 Stem Size, .210" Head Height, .080" Thickness.

Set of 12 Hardened Lash Caps w/ 5/16" Valve Stem, .230" Head Height

Includes 12 Hardened Lash Caps: 5/16 Stem Size, .230" Head Height, .080" Thickness.

Set of 12 PTFE Valve Seals for .530" Guide Size, 5/16" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Set of 8 Hardened Lash Caps w/ 3/8" Valve Stem, .190" Head Height

Includes 8 Hardened Lash Caps: 3/8 Stem Size, .190" Head Height, .080" Thickness.

Silicone Vacuum Hose, Orange, 10mm x 100cm

• 100-percent silicone construction
• Measures 10mm x 100cm
• Available in multiple colors

Spacer Kit, Small Block Ford Accessory Drive Crank Pulley - 3.00" Damper

• 3 options for multiple SBF applications

Stainless Intake Valve for GM LS3 w/ 2.165" Head, 4.894" Length

COMP Cams' part number 6072-1, Stainless Intake Valve for GM LS3 w/ 2.165" Head, 4.894" Length.

Steel Retainer for Set of 16

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 1.437"-1.500"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.750" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.350" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.900" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

STUD GIRDLE BAR, CB (1)

COMP Cams' part number 4021-B, STUD GIRDLE BAR, CB (1)

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Upgrade Kit for #1572, #1575, #1591 & #1594 GM E-Force Superchargers

Edelbrock Part #15035 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.

Tensioner Upgrade Kit for #1598 GM E-Force Superchargers

Edelbrock Part #15029 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.

Timing Chain for 3127, 3101, 3121, 3108 and 3113 Hi-Tech Timing Sets

Ideal for all street performance and race applications.

Timing Cover Gasket for 6200 Belt Drive

Extreme application belt for high rpm and high compression durability.

Titanium Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Tru-Time Adjustable Cam Gear Bolt

• Direct replacement
• Stainless Steel
• Accomodates a complete Cam Gear

UltraPro One Way Check Valve

• Body is Anodized Aluminum

VALVE SPRING,1.454" BEEHIVE

Beehive Shape Reduces Spring and Retainer Weight.