Engine Components

Hardened Steel Set of 12 - 7 Degree, 5/16", Single Groove Street Locks

Hardened Steel 7& deg

Hardware kit for SBC Cooling Manifold

• Genuine Holley Quality Parts
• Replacement Hardware Kit for the 20-240 SBC Kit

Hardware Kit For Split Intake-Silver

• Genuine Holley Quality Parts

High Energy 8.550" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy Hydraulic Flat Lifter for International Harvester 266-392

High Energy Hydraulic Flat Lifter Set for International Harvester 266-392

High Energy Hydraulic Flat Tappet Lifters.

High Energy Polylock for 3/8" Rocker Stud

3/8" High Energy Poly Lock

High Energy Polylock for 7/16" Rocker Stud

7/16" High Energy Poly Lock

High Vacuum Cam Seal

COMP Cams' part number 6200VCS, High Vacuum Cam Seal for 6200/6300 Belt Drive Kits

Hi-Tech 10.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 10.350" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 10.550" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 6.250" Long, .105" Wall, 5/16" Diameter Pushrod

Hi-Tech One-Piece 9.050" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.050" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 3/8" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 3/8" Rocker Thread

3/8 HI-Tech Stud

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16 HI-Tech Stud

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Idler Pulley-Smooth LT5 GM Engine

• Genuine Holley Quality Parts

ID Spring Locator - 1.080" OD, .440" ID, .045" Thickness

ID Spring Locator - 1.285" OD, .532" ID, .135" Thickness