Engine Components

Valve Spring Shim - 1.640" OD, .650" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

8 Degree Titanium Retainer Set for 7245 Dual Conical Valve Springs

7& deg

Engine Valve Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Hi-Tech 210 Radius 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set

< ul>< li> Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift</li>< li> Work well with Rocker arms that feature cup type adjusters and Applications requiring more load bearing surface from the Pushrod</li>< li> Same features as other Hi-Techâ„¢ pushrods with addition of 210& deg

Hi-Tech Oil Restricting 8.000" Long, .080" Wall, 5/16" Diameter Pushrod

Hi-Tech Oil Restricting 8.000" Long, .080" Wall, 5/16" Diameter Pushrod - Single

ID Spring Locator Set of 16 - 1.540" OD, .520" ID, .060" Thickness

Lifter Kit, Perf Lifters

Our Hy-Rev Anti Pump-Up lifters for 1991 and newer Sportsters are great for increasing valvetrain stability and helping to increase RPM capability.

Magnum 6.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.200" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set 12

Magnum 7.800" Long, .080" Wall, 5/16" Diameter Pushrod - Set of 12

Magnum 8.550" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Replacement Adjusting Nut for Magnum Rockers w/ 10mm Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Replacement Adjusting Nut for Magnum Rockers w/ 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

ROCKER ARM/PUSHROD KIT, CS 1.6

CS 1.6 Magnum Rocker Kit

ROLLER LIFTER, CSV-6

Set of 8 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

STEEL RETAINERS, 11/32" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.800" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Valve Spring Shim - 1.000" OD, .688" ID .060" Thickness

10 Degree, 3/8", Single Groove Lock w/o Lash Cap Recess, +.050" Height

Thise Steel Super Lock with +.050 install height features a 10& deg

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer Set of 4 for 1.500"-1.550" OD Valve Spring

1.500-1.550 Steel Retainer

10 Degree Titanium Retainer Set 12 for 1.5"-1.55" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 12 for 1.250" OD Single Spring

Upgrading to these 10& deg