Engine Components

Valve Spring Shims 100 - 1.640" OD, .635" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shim Set of 8 - 1.300" OD, .520" ID .015" Thickness

Valve Stem Locks 11/32" Diameter (0.50" Low)

Edelbrock part #9615 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

X ROLLER LIFTER, CRB CRH W/.140" SEAT

Xtreme Energy 212/218 Retro-Fit Hydraulic Roller Cam

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

Xtreme Energy 224/230 Retro-Fit Hydraulic Roller Cam

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

Xtreme Energy 240/246 Hydraulic Flat Cam for 352-428

Hydraulic: Street/Strip, 2800+ stall, headers, 9.5:1 compression, lower Gears, rough idle.

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer for 1.625" OD 26091 Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 26095 Beehive Spring

Upgrading to these 10& deg

11 Degree Steel Retainers for 1.225"-1.25" Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1 PTFE Valve Seal for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

7 Degree Steel Retainer Set of 12 for for 11/32 Valve w/ 26925 Spring

7& deg

7 Degree Titanium Retainer Set of 12 for 26925 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Tool Steel Retainer Set of 12 for 8mm Valve w/ 26926 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Steel Retainer for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Steel Retainer for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer for 26925 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Titanium Retainer Set of 16 for 26925 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Tool Steel Retainer for 11/32" Valve w/ 26926 Springs in Non-LS Engine

These new Tool Steel Retainers from COMP Cams have a 7& deg

Boost Timing Master for use with MSD Ignition Control

• Easily connects to your MSD Ignition.
• Adjust the timing from the driver’s seat.
• New feature allows you to set a boost pressure point to start the retard!

CAM BOLT, TOP FUEL 3/8" X 1.38

Cam Bolt, Top Fuel 3/8" X 1.380

Dual Taper 7.600" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.950" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.