Engine Components

7 Steel Retainer for 11/32" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Tool Steel Retainer for 8mm Valve w/ 26925 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Tool Steel Retainer Set of 12, 11/32" Valve w/ 26926 Springs in Non-LS Engine

These new Tool Steel Retainers from COMP Cams have a 7& deg

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR

Dual Taper 8.700" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Endure-X Solid Roller Lifter w/ .875" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .180" left offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from H11 material and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Hi-Tech 210 Radius 8.050" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 8.175" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnum 8.700" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.150" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Race Endurance 1.657" OD Conical Spring; 2.000" Installed Height; 1 Spring

Dual Conical Valve Springs.

Set of 8 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Straight 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Timing Chain 3110KT, 3110KT-5, 3110KT-10, 3125KT, 3121KT, 3110-5, 3110-10, 3120

Ideal for all street performance and race applications.

10 Degree Steel Retainer Set of 100 for 983 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer Set 100 for 1.250" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Tool Steel Retainer for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg