Engine Components

10 Titanium Retainer for 1.625" OD Triple Springs, +.050" Height over 739

Upgrading to these 10& deg

10 Titanium Retainer for 26095 Beehive Spring

Upgrading to these 10& deg

1 PTFE Valve Seal for .500" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

1 PTFE Valve Seal for .530" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .530" Guides (.630" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

7 Degree Steel Retainer Set 100 for 3/8" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Steel Retainer Set of 100 11/32" Valve w/ 26915/918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Steel Retainer Set of 100 for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Steel Retainer Set of 100 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Steel Retainer Set of 8 11/32" Valve w/ 26915/26918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Titanium Retainer Set of 16 for 26926 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Titanium Retainer Set of 16 for 7245 Dual Conical Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as strong as than most Steel ones.

7 Degree Tool Steel Retainer for 8mm Valve, Spring w/ 1.290" O.D

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Degree Tool Steel Retainer for 8mm Valve w/ 26926 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Steel Retainer for 11/32 Valve w/ 26925 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer Set of 16 for 11/32" Valve w/ 26915/26918 Beehive Springs

Upgrading to these 7& deg

7 Tool Steel Retainer for 11/32" Valve, Spring w/ 1.055" Valve Spring OD

These new Tool Steel Retainers from COMP Cams have a 7& deg

Accessory Drive Replacement Hardware - Godzilla A/C Bracket

• Direct replacement for Holley Godzilla accessory drive

BOLT KIT, FOR 6100 BELT DRIVE

6100 Belt Drive Bolt Kit

BRACKET Spacer Kit LT4 Accessory Drive Systems

• Genuine Holley Quality Parts

CAM & LIFTER KIT, OL XR262HR-1

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

CONICAL VALVESPRINGS,.650/.920

1.030/1.286" OD Conical Springs

Connecting Rod Vise - Billet Aluminum

• Overall Height: 10"
• Overall Width: 7"
• Depth: 2"

CRANK SEAL, HI VACUUM FOR 6200

High Vacuum Crank Seal for #6200 and #6300 Hi-Tech Belt Drive Systems

Dual Taper 10.000" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.450" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.