Engine Components

Timing Cover Gasket for 6200 Belt Drive

Extreme application belt for high rpm and high compression durability.

Titanium Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Tru-Time Adjustable Cam Gear Bolt

• Direct replacement
• Stainless Steel
• Accomodates a complete Cam Gear

UltraPro One Way Check Valve

• Body is Anodized Aluminum

VALVE SPRING,1.454" BEEHIVE

Beehive Shape Reduces Spring and Retainer Weight.

Valve Spring Shim - 1.250" OD, .814" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.250" OD, .814" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.300" OD, .520" ID .015" Thick

Valve Spring Shim - 1.437" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.480" OD, .765" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.480" OD, .765" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.437" OD, .645" ID .060" Thickness

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.480" OD, .765" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Stem Locks 11/32" Diameter

Edelbrock part #9614 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

10 Degree, .310", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock featuring a lash cap recess, 10& deg

OD Spring Locator Set of 100 - 1.670" OD, .640" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Straight 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

10 Degree Titanium Retainer Set of 4 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Degree Tool Steel Retainer Set of 12 All Valves w/ 1.437"-1.500" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Lightweight Titanium Retainer for 1.625" OD Triple Springs

Upgrading to these 10& deg

10 Superlock Steel Retainer for 1.250" OD Valve Spring

1.250 spring diameter Steel retainer valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.250" OD Single Spring

Upgrading to these 10& deg