Engine Components

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock with lash cap recess features a 10& deg

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.625" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set 16 for 1.625" OD Triple Springs,+.050" Height over 739

Upgrading to these 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

6-BTM Boost Timing Master

• 12-15 Volts, 7 Volt Start
• CARB E.O. Approved
• Supplied with rubber shock mounts

Chain for 3100KT, 3100KT-5, 3100KT-10, 3135KT, 3100-5 and 3100-10 timing sets

Ideal for all street performance and race applications.

Digital Multi-Retard

• Magnetic pick-up compensation circuit
• Adjustable start retard
• Four stages of retard

DUAL SPRING, 1.546 OD, 1.950 IH, .800 LIFT, 638 LBS/IN, SUPERFINISH

COMP Cams' new 26944 dual valve springs are a product of innovative design and superior craftsmanship.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Hi-Tech 7.350" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.125" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.200" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 8.380" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

ID Spring Locator Set of 16 - 1.510" OD, .630" ID, .060" Thickness

ID Spring Locators for 26120

Intake Valve for 60459, 60479, 60499 & 60559 Heads

The Edelbrock #9770 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LS/LT High-Mount Accessory Drive Bracket - Passenger's & Driver's Side Brackets

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

Machined Steel 7 Degree, 8mm, Single Groove Race Lock

Machined Steel 7 Degree, 8mm, Single Groove Race Lock - Single

Machined Steel Set of 16 - 7 Degree, 3/8", Single Groove Race Locks

These single groove Machined Steel Street Locks with 7& deg

Magnum Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.