Engine Components

Set of 16 Metal Body Viton Valve Seals for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Set of 16 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Set of 16 PTFE Valve Seals for .500" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

7 Steel Retainer Set of 16 for for 11/32 Valve w/ 26925 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer Set of 16 for 26921 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

DUAL SPRING W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

High Energy 6.248" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 8.100" Long, .105" Wall, 5/16" Diameter Pushrod Set

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Replacement Pivot Ball Set for Magnum Rockers w/ 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock with lash cap recess features a 10& deg

10 Lightweight Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer Set of 16 for 1.625" OD Double Springs

Upgrading to these 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

6-BTM Boost Timing Master

• 12-15 Volts, 7 Volt Start
• CARB E.O. Approved
• Supplied with rubber shock mounts

Digital Multi-Retard

• Magnetic pick-up compensation circuit
• Adjustable start retard
• Four stages of retard

DUAL SPRING, 1.546 OD, 1.950 IH, .800 LIFT, 638 LBS/IN, SUPERFINISH

COMP Cams' new 26944 dual valve springs are a product of innovative design and superior craftsmanship.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Hardened Steel Set of 16 - 7 Degree, 5/16", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hi-Tech One-Piece 8.050" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg