Performance Parts

90 Degree Low Profile Hei Boot/Terminal Kit

• All boot/terminals fit 8-10.4mm
• Pack of 11

Conical Valve Cover Breather with 9mm Inlet in Black Element

Edelbrock part #43510 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter.

Dual Gauge Panel Assembly for Kit 25812

• Limited Warranty 2 Year
• Made In USA
• Dual Gauge Panel Assembly

GAUGE BRACKET KIT; 2 1/16in.; BLACK COMPOSITE; QTY 3

• Includes 3 Aluminum Mounting Brackets
• Includes 6 Lockwashers
• Includes 6 Aluminum Thumb Nuts

GAUGE; WATER TEMP; 2 1/16in.; 120-240deg.F; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

Set of 16 PTFE Valve Seals for .530" Guide Size, 3/8" Valve Stem

Fits: 3/8" Valve Stems - .530" Guides (.630" Seal Diameter).

Spring Rubber

Single Spring Rubber

• Fits springs with 2.50" inside diameters.
• Adds approximately 0.75" of solid height to your spring.
• Made in the U.S.A. and sold individually.

Vent Air Filter/ Breather

• 3/4 inch zinc tube
• Chrome -plated steel base plate
• Washable and reusable filter media

WirelessAir Control System App Only, No Controller, With EZ Mount

• Heavy Duty Air Compressor
• Easy Installation With Common Mechanics Tools
• Included Easy To Read Installation Guide

Brakes ReMaster to ReMaster Prop Valve Hardlines

• Stainless Steel Construction
• Brilliant Chrome Finish
• Fits 15/16" & 1" Remaster

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

FITTING; THERMOCOUPLE COMPRESS; 3/16in.; 1/8in. NPTF MALE; STAINLESS; INCL WELD

• Incl. 3/16 in. Thermocouple Compression Fitting To 1/8 in. NPMT
• Incl. 1/8 in. NPFT Bung
• Manufactured From High Carbon Steel

GAUGE; FUEL PRESSURE; 2 5/8in.; 15PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• Digital Fuel Pressure Gauge

GAUGE MOUNT; 2 1/16in.; PEDESTAL W/CARBON FIBER CUP

• Gauge Mounting Cap

GAUGE; PYROMETER (EGT); 2 1/16in.; 2000deg.F; DIGITAL STEPPER MOTOR; PHANTOM

• 12 And 16V Compatible
• Incl. Type-K Thermocouple; Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; SPEEDOMETER; 3 3/8in.; 160MPH; ELEC. PROGRAMMABLE; CHRONO CHROME

• Unique Three-Dimensional Dial Design Gives Added Depth And Style To Your Custom Dash
• Capable Of Registering One-Million Miles with Two Resettable Trip Odometers
• Simple Push Button; 2 Mile Drive Calibration; No Dip Switches

High Energy 212/212 Hydraulic Flat CL Kit Kit International Harvester 304-392

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

Power Steering Hose End-Black Chromate

• Black Chromate Finish

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

40 Series Chambered Muffler

• No internal packing to blowout
• Aggressive Sound Exterior Exhaust Tone
• Durable fully welded 16 gauge aluminized steel

Armor BLK Exhaust Tip

• High Quality/Black Finish T304 Stainless Steel
• Finish Off Your MBRP Inc. Exhaust In Style
• Show Quality Finish

Non Stick Fuel Bowl Gaskets

Non Stick Fuel Bowl Gaskets - For most carburetors with a metering block (4150/4160 style, Q, RQ, SS, HR, QfX Series) - Sold in pack of 10

Side Hung Float

• Genuine Holley Quality Parts

SPE-8132 Spectre Conical Filter

• High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes (included adapter rings)
• Factory pre-oiled and ready to use
• Red colored filter media