Performance Parts

Inverted flare plug 3/8-24

• Manufactured to OE specifications

Lifter Valley Standpipe - Set of 8

These standpipes help maintain a healthy oil level in the valley of your Small Block Chevrolet.

LINE; BRAIDED STAINLESS STEEL; #3 DIA.; 4FT. LENGTH;-3AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 4 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 6FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 6 ft. Hose Length
• 12000 PSI Burst Pressure

Line Clamp

• Widest Selection Available

Line Clamp

• The Fasteners have 8-32 threads and are 3/4" Long

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

Low-Mount LS Accessory Drive Bracket - Passenger's Side A/C Bracket

• Small Compact Accessory Brackets & Complete Kits
• Cost Effective Solution
• Also works on LSA supercharged engines

LS Accessory Drive Bracket - Installation Kit for Long Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

M 9100 (Bump Stop) - Suspension Bump Stop

• Filled with technology perfected over 3 decades of off-road dominance
• Monotube gas pressure design maximizes heat dissipation
• Available for lifted truck, custom truck, rock crawling and off-road racing applications

Machined Steel 7 Degree, 8mm, Single Groove Race Lock

Machined Steel 7 Degree, 8mm, Single Groove Race Lock - Single

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnum Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Marine Flame Arrestor

• Marine approved per SAE J1928 standard
• Smoothes and straightens incoming air
• Washable and reusable

Marine Series 750 CFM Carburetor with Electric Choke (non-EGR)

The Edelbrock 1410 Marine Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the harsh abuse only a marine environment can inflict.

Max-Shift Break-In Transmission Fluid 1 Gallon

The TCI Max Shift Break-In Transmission Fluid is the perfect solution for guarding against heat build-up and wear during the critical 30 minute break-in period and initial drain of your automatic transmission.

Max-Shift Break-In Transmission Fluid 3 x 1 Gallon Bottles

The TCI Max Shift Break-In Transmission Fluid is the perfect solution for guarding against heat build-up and wear during the critical 30 minute break-in period and initial drain of your automatic transmission.

MMBB-STBK Banjo Fitting w/Bolt M20 x 5/8 Straight, Black

• Allows for precise routing of Baffled Oil Catch Can hose
• Features M20 x 1.5 to straight push-on for 5/8-in hose
• 6061 aluminum, CNC-machined

MMBCC-UNI-BK Baffled Oil Catch Can, Black

• 40-micron bronze filter blocks oil from depositing in ventilation system
• Special engineered inlet pattern turbulates air longer, allowing oil to condense
• Internal baffle ensures no oil escapes during high-speed cornering

Module Bypass Cable, GM HEI

Adapts MSD Distributor to harness on GM Ignition, MSD 6M-2 PN 6460, MSD 6-Offroad PN 6470 or MSD 8 Ignition PNs 7800, 7802.

Muffler Smithy 26" 2" in/out

Patriot Exhaust H3011 Muffler Smithy 26" 2" Inlet/Outlet

Nitrophyl Float (Road Race)

Nitrophyl Float (Road Race) - molded wedge on both sides to control fuel when turing right and left!

Nitrophyl Float Wedge Primary

Nitrophyl Float Primary Wedge - For circle track use on the primary bowl.

No-Weld O2 Sensor Mount

• No need to weld O2 bung into exhaust.
• 2in pipe diameter.
• Made of stainless steel.