Performance Parts

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

11" x 11" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

135 Degree Deg Boot Black Sillicone

• Color: Black
• All boot/terminals fit 8-10.4mm
• Pack of 25

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 3" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

180 Degree Boot/Terminal Kit Gray

• Color: Gray
• All boot/terminals fit 8-10.4mm
• Pack of 8

22 Channel CAN Sensor Module

• Four Dedicated 0-5V analog inputs
• Four Temperature (thermistor) inputs
• One Tach Input

2.5 X 2.5in. 180 degrees Performance Exhaust Y-Pipe

• Superior flow & performance
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

2.75" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15823 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.00" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15822 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

3.50" 6-Rib E-Force S/C Pulley in Black Finish for Stage 3 - Pro Tuner System

The Edelbrock pulley part #15820 allow you to fine tune the airflow and performance of your Edelbrock Supercharger System to your preference.

35 Lb/Hr Pico Fuel Injector (Qty 8)

The Edelbrock #3636 is a 35 pound-per-hour Fuel Injector for the ProFlo EFI Systems.

45-Degree Transition Coupler, Black, Silicone, 2.00in to 2.50in

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

4in. Round Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

4-PIN WIRE HARNESS/CAPACITOR FOR ALL FLAME-THROWER HEI DISTRIBUTORS AND GM 8-CYLINDER HEI DISTRIBUTORS

• Premium quality wire harness and capacitor.
• Insure good connection and "static free" operation.

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

5 BAR Stainless Steel MAP Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

5in. Round Polished Exhaust Tip

• Built to the highest standards in the industry
• Constructed using the latest manufacturing technologies
• Durable corrosion-resistant stainless steel construction

5 X 8in. Oval Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

6 AN Male to 1/2"-20 Male - 5/16" Inverted Flare Fitting

• Available for Any Plumbing Situation And Many Custom Applications

75 Series Pro-filter 2 8AN Male In/Out, 10 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

7 Degree Steel Retainer Set of 16 for 3/8" Valve w/ 1.437"-1.500" Spring

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

7 X 7in. Round Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

8 AN Aluminum Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications