Performance Parts

Hi-Tech One-Piece 7.800" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 7.800" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Tech One-Piece 7.950" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 7.950" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.280" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.550" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.550" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.700" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.780" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.780" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hose, 50'

• Limited Warranty 2 Year
• Made In USA
• Hose 50 ft.

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

Hose End

• For use w/PowerFlex High PSI PTFE Hose
• Machined from Steel with Endura Finish Nickel Plating

Hose Separator

• 6061-T6 Aluminum
• Black Anodized
• Fits 6 AN ProClassic Hose

Hose & Tubing Separator

• For Professional Engine Look

Hose & Tubing Separator

• For Professional & Aggressive Engine Look

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HydraMat® Install Magnet Kit

• Magnet with integrated mounting stud
• Easy installation
• Includes 4 magnets, nuts and washers

Idle Air Control Motor for Atomic TBI

Atomic TBI and Atomic 2 factory replacement IAC motor, includes gasket O-ring.

ID Spring Locator Set of 16 - 1.300" OD, .520" ID, .060" Thickness

Older standard shims will not hold up to the extreme spring pressures and high RPM found in today's engines.

ID Spring Locator Set of 16 - 1.300" OD, .570" ID, .060" Thickness

Spring ID Locators Set of 16 - 1.300" OD, .570" ID, .060" Thickness, .910" Spring ID

ID Spring Locator Set of 16 - 1.300" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.655" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.