Performance Parts

Performance Exhaust VB25 3" Stainless Steel V-Band clamp and flanges

JBA is proud to offer accessories to aid in the fitment of your JBA exhaust product.

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Performer Series and Thunder AVS Carburetor Metering Rods .073 x .042" (Qty 2)

The Edelbrock Metering Rods .073 X .042 Pair

Performer Series and Thunder AVS Carburetor Metering Rods .075 x .042" (Qty 2)

The Edelbrock Metering Rods .075 X .042 Pair

Perf Street Sprung Disc

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Plug

• 6061-T6 Aluminum
• Precision Machined

Power Grid 4-Connector Hub

This hub allows you to expand the Power Grid system with up to four accessory modules.

Power Grid Dual NTK Wide Band O2 Module

• Can be expanded to operate with a second sensor MSD PN 2268
• LEDs to monitor system operation and health
• Plug and Play Power Grid module

Power Steering Hose - Black - Size -6 - 6 Ft

• For Use With Earl's Power Steering Hose Ends Only

Primary Wedged Float

• Genuine Holley Quality Parts

ProClassic Hose End

• For use with Russell ProClassic Hoses
• Light Weight Crimp Hose End Design

ProClassic Stainless Hose

• For use with Fuel, Water, and Oils
• For use with Russell ProClassic Hose Ends
• Stainless Steel Covering

ProClassic Stainless Hose

• For use with Fuel, Water, and Oils
• For use with Russell ProClassic Hose Ends
• Stainless Steel Covering

Pro-Flo® Universal Black Tall Conical Air Filter with 3", 3.5", and 4" Inlet

Edelbrock Universal Pro-Flo Conical Air Filter #43690 is an economical way to ensure your engine is getting clean air, without the expense of buying a new filter every few thousand miles.

Pro-Lite 350 Hose - Size 10 - 20 Ft. Length

• Constructed In USA

Protect-A-Boot and Wire Kit Red 8 Cylinder 010722

• 25 Hi-Temp Shrink Tubes
• 8 Protect-A-Boots
• Available In 5 Colors

Protect-A-Wire Spools Silver 8mm Bulk 010601B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

ProXS Muffler 2.5in Offset Inlet/ 2.5in Center Outlet 4.25in x 7.88in Oval x 14in Long Body Notched Necks

• Universal muffler. Reversible design.
• 2.5" Offset Inlet / 2.5" Center Outlet, 4.25" x 7.88" Oval, 14" Long Body, 19" Overall Length
• Notched necks are designed for clamp in installation. Use 1" wide band clamps 18325.

QFX & 4500 Style 4 Hole Flange Gasket 1250 CFM

Quadrajet Carburetor Replacement Adapter Kit

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2697 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadra jet carburetor).

Quadrajet Primary Metering Jet - .070" (Qty 2)

The Edelbrock #1970 Primary Metering Jets For The Edelbrock Q-Jet Carburetor and Factory Quadra jets, All Years .068".

Quick Release Clamp Assembly, Gold, 2.5in

• Unique locking system for a trustworthy connection to your piping
• Withstands up to 400F and 110PSI operating pressure range
• Allows for angular, axial, and radial movement while remaining sealed with Viton O-rings

Race Extreme 1.686" OD Triple Springs; 2.200" Installed Height; 16 Springs

Elite Race Triple Valve Springs from COMP Cams have a 1.000" maximum lift and outside diameter of 1.677".

Race Sportsman 1.454" OD Beehive Springs; 1.800" Installed Height; 16 Springs

COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train.

Race Sportsman 1.585" OD Beehive Springs; 1.925" Installed Height; 16 Springs

With a .640" maximum lift, these Beehive Valve Springs were designed for high end Solid flat tappet and hydraulic Roller cams.