Performance Parts

LED BULB; REPLACEMENT; T1-3/4 WEDGE; GREEN; FOR MONSTER TACH

• 2 Lumen Output
• .02 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T1-3/4 WEDGE; RED; FOR MONSTER TACH

• 1.5 Lumen Output
• .02 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED BULB; REPLACEMENT; T3 WEDGE; RED

• 6.5-8 Lumen Output
• .06 Amp Draw
• Bulb Life Expectancy 100000 Hours

LED INDICATOR LIGHT KIT (2 GREEN; 1 BLUE)

• Set Of Three 5/32 in. LED Indicator Lamps; 2 Green; 1 Blue
• Ideal For Turn Signal And High Beam Lights

LINE ADAPTR-MNFLD FOR SD7 A/C COMP

• Manifold adapter allows connection to custom A/C lines

LINE; BRAIDED STAINLESS STEEL; #3 DIA.; 4FT. LENGTH;-3AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 4 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 4FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 4 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 6FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 6 ft. Hose Length
• 12000 PSI Burst Pressure

Line Clamp

• Widest Selection Available

Line Clamp

• Widest Selection Available

M 9100 (Bump Stop) - Suspension Bump Stop

• Filled with technology perfected over 3 decades of off-road dominance
• Monotube gas pressure design maximizes heat dissipation
• Available for lifted truck, custom truck, rock crawling and off-road racing applications

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnet Sleeve (only) for 1247 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1247 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 2842 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 2842 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for LU-147A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix LU-147A (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for MR-1122A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix MR-1122A (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (replacement) for FLAME-THROWER 4 cylinder Billet Distributor

• Replacement Part (only) for PerTronix Flame Thrower Distributors

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.295" Long, .080 Wall, 5/16 Diameter Pushrod - Set of 16

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Rocker Stud Set w/ 7/16" Base Thread and 7/16" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

MAP Sensor 3-bar for blown/turbo applications

• Applications up to 30lbs of boost.

Marine Flame Arrestor

• Marine approved per SAE J1928 standard
• Smoothes and straightens incoming air
• Washable and reusable

MECHANICAL ADVANCE KIT WITH LIMITER FOR ALL FLAME-THROWER BILLET DISTRIBUTORS

• Performance mechanical advance springs.

Mechanical Fuel Pump Diaphragm Assembly (Low Pressure)

• Complete diaphragm assembly for -30 and -40 Ultra HP fuel pumps

MMOCC-SAWRD Oil Catch Can, Red, Aluminum, Small

• Separates oil particles from PCV/CCV air
• Defends intercooler, intake system, and essential components from oil blow-by
• Made from lightweight aluminum