Performance Parts

Hi-Tech 8.800" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Press-In Dust Cap; 1.99in. Diam.; 2;200-4;400-lb. Axles; Super Lube; 10 Pack

• Axle Dust Cap

Spark Plug Wire / Boot Shrink Tubes 12mm x 1.5" Blue 010831

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Universal Clamp-On Air Filter

• ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as…
• UNIVERSAL FITMENT: Designed for use on a variety of applications
• NO-HASSLE WARRANTY: 1-Year Limited Warranty

Universal Clamp-On Air Filter

• ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as…
• UNIVERSAL FITMENT: Designed for use on a variety of applications
• NO-HASSLE WARRANTY: 1-Year Limited Warranty

GAUGE MOUNT; ANGLE RINGS; 3 PCS.; BLACK; FOR 2 1/16in. GAUGES

• Quality Molded
• Black Plastic Rings
• Sold 3 Per Package

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 4.50 Min. Diameter And 10.00 Max. Length

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock with lash cap recess features a 10& deg

10 Lightweight Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Steel Retainer Set of 16 w/ +.050" Installed Height for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.625" OD Double Springs

Upgrading to these 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

11" x 11" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

12-1/4in. Standard Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 16000lbs Axle Capacity
• 8 On 275mm Bolt Pattern
• 17-1/2 in. Wheel Size

12in. Hybrid Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 8000lbs Axle Rating
• 12 in. Brake Hub Size
• 5/8 in. Stud Size

12 Pack of 12 oz. Bottle Engine Break-In Oil Additive

Due to government regulations, in recent years oil manufacturers have removed the Zinc and many other additives from their motor oils.

135 Degree Deg Boot Black Sillicone

• Color: Black
• All boot/terminals fit 8-10.4mm
• Pack of 25

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 3" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels