Performance Parts

Hi-Tech One-Piece 8.100" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.100" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.500" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.680" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.680" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Temp Shrink Tubes 6mm x 50' 010855

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hose & Tubing Separator

• For Professional Engine Look

Hot Rod Kit 2.5in O.D. T-304 Stainless Steel

• If clamping, use wide (2 bolt style) band clamps
• If clamping, use wide (2 bolt style) band clamps
• Brushed finish can be polished prior to installation

HP Plus Disc Brake Pad

• HP Plus Compound
• Wide Temperature Range
• Fade Resistant

HPS 5.0 Disc Brake Pad

• Improved Pedal Feel
• Gentle On Rotors
• Extended Pad Life

HPS 5.0 Disc Brake Pad

• Improved Pedal Feel
• Gentle On Rotors
• Extended Pad Life

HPS Disc Brake Pad

• Extended Pad Life
• Low Dust
• Virtually Noise-Free

Hump Hose Coupler, Black, Silicone, 3.00in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

Hump Hose Coupler, Red, Silicone, 3.00in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

HVAC Filter; 18 x 20 x 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

Idle Mixture Screw Set for all Edelbrock Square-Bore Carburetors (Qty 2)

The Edelbrock Idle Mixture Screw Set #1496 includes a pair of idle mixture screws and springs for all Edelbrock square bore carburetors.

ID Spring Locator Set of 16 - 1.285" OD, .805" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness - Set of 16

ID Spring Locator Set of 16 - 1.300" OD, .570" ID, .060" Thickness

ID Spring Locator Set of 16 - 1.300" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.500" OD, .585" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.600" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.625" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

Inner Bearing Cone; 12;000-16;000-lb. Axles; 4 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing Race No.3920
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Race; 12;000-16;000-lb. Axles; 6 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing No.3984
• Easy DIY Installation; Includes Six Inner Races