Performance Parts

Valve Spring Shim Kit - 1.500" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.500" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.640" OD, .635" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

V-Band Clamp 2.5in T-304 Stainless Steel

Made from T-304 Stainless steel.

V-Band Clamp 3in T-304 Stainless Steel

Made from T-304 Stainless steel.

Vent Air Filter/ Breather

• 3/8 inch zinc tube
• Chrome -plated steel top and base plate
• Washable and reusable filter media

Vent Air Filter/ Breather

• 1-1/4 inch clamp-on flange
• Clamps onto a vent tube or outlet
• Washable and reusable filter media

Vent Air Filter/ Breather

• 1/2 screw in flange
• Fits threaded valve covers
• Washable and reusable

Vent Air Filter/ Breather

• Shield and top plate are chrome plated
• 3 inch outside diameter by 2-1/2 inches tall
• Washable and reusable

VRS-4150 Calibration Kit for PN 1306, 1307, 1308, 1309

• Contains four of each even numbered main fuel jet from 62-78 for quick global fuel adjustment.
• Contains 40 fuel circuit 10-32 bleed jets for quick fine-tuning adjustments.
• Includes power valves and channel restrictors for ideal lean cruise to power enrichment adjustments

VRS-4150 Race & Performance Carburetor 750 CFM

Edelbrock VRS-4150 Race & Performance Carburetor #1307 750 CFM is street friendly but race ready.

Water/Methanol Injection Reservoir

• Compact design for various installation options
• Built-in level sensor to warn of low level
• Large reservoir cap to help with refill

Weathertight Connector - 1-Pin - Qty 1

The Weathertight connectors are molded from a special nylon material to withstand temperatures from -40° to +257°F and are indexed to prevent mismatching.

Wheel Clamp Ring; 5/8in. Studs

• This Item Ships In A Kraft Box

White Ceramic Spark Plug Boot 45 Degree

• Available in 45, 90 and 180 degree boot angles
• Sold individually or in sets of 8
• Boots are available in white or black

White Ceramic Spark Plug Boot Straight Set of 8

• Available in 45, 90 and 180 degree boot angles
• Sold individually or in sets of 8
• Boots are available in white or black

Wide Band O2 For Power Grid

• Bosch 4.9 oxygen sensor, PN 2267
• Plug-n-play with MSD Power Grid
• Data logs air-fuel ratio and heater voltage

Wide Band Stainless-Steel Clamp 2.25"-2.56" 010214

• Can Be Polished To A Show Finish
• Great As An Exhaust Clamp
• Clamp Has A Range Of 2.25 in To 2.56 in.

Wire Cylinder Markers - 8.5MM

They will withstand high underhood temperatures and are available in two sizes.

Wire Harness

3-wire for ignition box.

WirelessAir Harness (2nd Generation)

• WirelessAIR Harness

Wiring Harness - 3-Pin

3-pin Ready-to-Run Distributor replacement harness, stock length.

Worm Gear Clamp, High-Torque, Silver, 18mm - 32mm, Pack of 10

• Securely clamps pipes, couplers, and hoses with an outer diameter from 0.71- 1.26-in (18mm-32mm)
• Worm gear design for quick and easy tightening
• Stainless steel construction resists corrosion longer than zinc-plated clamps

X-Stream Top Assembly

• Air filter top adds filter area
• Improves air flow
• Washable and reusable

X-Stream Top Assembly

• Air filter top adds filter area
• Improves air flow
• Washable and reusable