Performance Parts

Set of 16 O-Ring Valve Seals for Stock Guide Size, 11/32" Valve Stem

Fits: 11/32" Valve Stems / OE-Size Valve Guides (.400" Outer Diameter).

10 AN Plug

• Black Anodized

90-Degree Silicone Transition Coupler, 2.00-in to 2.25-in, Black

• Allows for easy routing of complex coolant or intercooler pipes
• 100-percent silicone construction
• Constructed from four layers of silicone with embedded heat-resistant fibers

Adjustable Timing Control

• Adjust the timing 15° from the driver’s seat!
• Easily connects to your MSD Ignition.

All American Nickel 2-5/8" Air Pressure Gauge

• Pushbutton calibration
• Pressure transducer included
• Easy to read 2 5/8" size

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Metric Coilover Spring

Single Spring

• Available in Linear or Progressive Rates
• Each Spring Individually Tested
• Highest Linearity and Guaranteed Consistency

SPE-5965 Fuel Filter

• Universal, inline
• Chrome plated
• Canister housing

Universal Micro Electric Fuel Pump - 38 GPH / 144 LPH (Diesel)

Edelbrock part #17302 fuel pump is a gravity fed type pump with a simple 2 wire design.

Tip 2.5in Inlet/ 3.5in Outlet Single Round Angle-Cut Intercooled

Borla(r) premium-quality exhaust tip features mirror-polished high quality T-304 austenitic stainless steel, precision welds and distinctive styling.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

8mm Spiro-Pro Repair Kit 90 Degree/180 Degree Red

• Color: Blue
• Taylor repair wire kits provide easy replacement for damaged wire
• HEI and socket style distributor ends provided in kits

Air Filter Wrap

• This product wraps your air filter with an additional pre-filter
• Extends service interval of your K& N filter
• Water repellent treatment typically lasts 1 to 2 years

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Magnetic Pickup for all MSD Billet Distributors

• Replacement maintenance-free magnetic pickup
• Found in all Pro-Billet Distributors

Max-Fire Engine Specific (Ultra-Spark 50) High Performance Spark Plug Wire Set

The Edelbrock #22711 Max-Fire Universal Ultra-Spark 50 spark plug wire sets feature the same high quality as our model specific sets, but give you the flexibility to tailor them to fit your V8 application perfectly.

10 Lightweight Titanium Retainer Set of 16 for 1.625" OD Triple Springs

Upgrading to these 10& deg

All American 3-3/8" Speedometer Gauge

• 140 MPH
• Stainless Radial Bezel
• Curved Glass Lens

Autocross Gray 2-1/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Small 2 ⅛" hole size
• Push-button calibration

Coupler

• Fits 2.5 to 2.75 inch diameter tubes
• 3 inches in length
• Constructed from long-lasting and durable EPDM rubber

Dual Taper 9.250" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Engine Timing Belt

Floor & Tunnel Shield II 42" x 48" 050503

• Constructed From 10 Mil Aluminum
• Just Trim Peel And Stick
• Peel and stick adhesive backing

Gate Plate

• Sold Individually
• Replacement Part
• Forward Pattern

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; NV

• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions
• 12 And 16V Compatible