Performance Parts

10 Degree, .310", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock featuring a lash cap recess, 10& deg

G/Stock 3-3/8" Speedometer Gauge

• Push-button calibration
• Installation hardware included
• Analog .5 to 4.5 VDC output for data logging systems

Muffler Mini-Style

Patriot Exhaust H3120 Muffler Mini-Style 1 1/4" core 8" length 1 5/8" case

Pro+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

ProClassic EFI Hose End

• 37 Deg. AN Flare
• 6061-T6 Aluminum
• Positive Anti-Leak Seal

S4 Brake System Front

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 2-Piece Slot, Drilled, Zinc-Plate Rotor

Speed-Flex Hyperfirm® Pre-Made Hose

• Pressure Tested To 4000 PSI

Velocity White 2-5/8" Full Sweep Water Temp Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

Universal Clamp-On Air Filter

• ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as…
• UNIVERSAL FITMENT: Designed for use on a variety of applications
• NO-HASSLE WARRANTY: 1-Year Limited Warranty

0.375x0.50in Oxygen Sensor Bung 20 Pack

• Universal Fit
• Built to the highest standards in the industry
• CNC precision robotic manufacturing techniques

1000 PSIg Stainless Sensor Kit

• Includes 1/8" NPT to -4 AN adapter included
• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.00 Min. Diameter And 5.25 Max. Length

100 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

10AN Braided Line Fitting, 180 Degree

• CNC-machined 6061 aluminum -10AN line fitting
• Available in straight, 45-degree, 90-degree, and 180-degree configurations
• Applicable with CPE rubber braided lines only

10 AN Male to 5/8" Tubing Adapter

• Black Anodized

10 AN Straight Push-On Hose Ends - Black

• AN Sizes: -4 to -12 AN
• Finish: Black Satin Anodized
• Hose End Material: 6061 Aluminum

10 AN Straight Swivel Hose End - Black

• Satin Anodized Finish w/o any Logos
• Hose Ends Material: 6061 Aluminum
• AN Sizes: -4 to -12 AN

10 Degree Titanium Retainer Set of 4 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

1/0 Ga Battery Cable Kit Black 8ft

• Crimped tin plated brass top post terminals on both cable ends - 1 positive, 1 negative
• Includes copper ring terminals for starter and ground connections
• Comes complete with "P" clip cable mounts and shrink sleeve tubing for a professional finish

10in. RV Brake Drum Hub for 3;500-lb Axle-5 on 4.5in.; 1/2in. Stud (Fully Assemb

• 1/2 in. Stud
• Stud Size 1/2 in.
• Bearing Cones

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Steel Retainer for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.250" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.250" OD Single Spring

Upgrading to these 10& deg