Performance Parts

X-Stream Top Assembly

• Air filter top adds filter area
• Improves air flow
• Washable and reusable

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

7 Tool Steel Retainer for 8mm Valve w/ 26925 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

All American Nickel 2-5/8" Exhaust Gas Tempature Gauge

• Completely electric
• Push button calibration
• Easy to read 2 5/8" size

All American Tradition 2-1/8" Fuel Level Gauge

• Pushbutton calibration
• Small 2 ⅛" hole size
• Installation hardware included

All American Tradition 3-3/8" Speedometer Gauge

• 3 3/8" Diameter
• Stainless High Step Bezel
• Curved Glass Lens

Autocross Gray 2-5/8" Fuel Level Gauge (0-90 Ohm)

• Easy to read 2 5/8" size
• Flat glass lens
• 0 ohms empty, 90 ohms full

Autocross Yellow 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Easy to read 2 5/8" size

Autocross Yellow 2-5/8" Stock Eliminator Temp Gauge

• Pushbutton calibration
• Easy to read 2 5/8" size
• Installation hardware included

Auto-Flex Hose - Size 16 - 20 Ft. Length

• Textile Braid In Hose Liner

Axle Wheel Stud; 0.689in. Knurl; 5/8in.-18 Thread; 3-7/16in. Shoulder Length; 4

• Type Wheel Bolt
• Diameter 0.689 in. Knurl
• Thread End 0.625 in.-18

Brakes 6S, 6R & XTR Rear Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Crush Washers & Dust Cap
• Services 1 Caliper

Brakes Premium Aluminum 4-Lug Wheel Spacers – 4x100, 4x108, 4x114.3 Bolt Patterns

• Widen Track
• 6061-T6 Aluminum
• Sold in Pairs

Brakes ReMaster to ReMaster Prop Valve Hardlines

• Stainless Steel Construction
• Brilliant Chrome Finish
• Fits 15/16" & 1" Remaster

Brake Street S4 Disc Brake Pads for Select S4 Calipers

• Replacement Pads used in certain S4, 4-piston calipers
• Caliper hardware (8 pad abutments) sold separately.
• Sold in axle sets.

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

Conical Seal

• Easily Installed

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR

Double-Eye Leaf Spring Trailer Equalizer; 1-3/4in. Spring Width; 33in. Axle Spac

• Comes With Nylon Bushings
• Industry Reference EQ-310

DryFlow Air Filter

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.100" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

ELECTRONIC VOLTAGE REGULATOR-CHROME

ACCEL Motorcycle electronic voltage regulators do not require any re-wiring or special mounting.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.