Performance Parts

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 7.50 Max. Length

100 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

10AN Braided Line Fitting, 180 Degree

• CNC-machined 6061 aluminum -10AN line fitting
• Available in straight, 45-degree, 90-degree, and 180-degree configurations
• Applicable with CPE rubber braided lines only

10 AN Male to 5/8" Tubing Adapter

• Black Anodized

10 AN Straight Push-On Hose Ends - Black

• AN Sizes: -4 to -12 AN
• Finish: Black Satin Anodized
• Hose End Material: 6061 Aluminum

10 AN Straight Swivel Hose End - Black

• Satin Anodized Finish w/o any Logos
• Hose Ends Material: 6061 Aluminum
• AN Sizes: -4 to -12 AN

10 Degree Titanium Retainer Set of 4 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

1/0 Ga Battery Cable Kit Black 8ft

• Crimped tin plated brass top post terminals on both cable ends - 1 positive, 1 negative
• Includes copper ring terminals for starter and ground connections
• Comes complete with "P" clip cable mounts and shrink sleeve tubing for a professional finish

10in. RV Brake Drum Hub for 3;500-lb Axle-5 on 4.5in.; 1/2in. Stud (Fully Assemb

• 1/2 in. Stud
• Stud Size 1/2 in.
• Bearing Cones

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Steel Retainer for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.250" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.250" OD Single Spring

Upgrading to these 10& deg

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer for 26095 Beehive Spring

Upgrading to these 10& deg

10 Titanium Retainer Set 16 for 1.625" OD Triple Springs,+.050" Height over 739

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.437"-1.500" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 26095 Beehive Spring

Upgrading to these 10& deg

1-1/16in. Wheel Bearing Kit

• Features A 1 1/16 In. I.D.
• Maintains The Correct Internal Pressure To Avoid Seal Damage

115 Deg Boot Gray Sillicone

• Color: Gray
• All boot/terminals fit 8-10.4mm
• Pack of 25

11 Degree Steel Retainers for 1.225"-1.25" Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

11" x 11" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

12-1/4in. Standard Threaded Brake Hub Assembly with Races/Wheel Studs

• 12000lbs Axle Capacity
• 17-1/2 in. Wheel Size
• 5/8 in. Stud Size

12-1/4in. Standard Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 8000 lbs. Axle Rating
• 5/8 in. Stud Size
• One-Year Warranty

12in. Brake Hub with Bearing Kit; 7;000-lb. Axles; 8 on 6-1/2in. Bolt Pattern

• Axle Rating 7000 lbs.
• Stud Size 1/2 in.
• Limited 1-Year warranty