Performance Parts

Machined Steel 7 Degree, 5/16", Single Groove Race Lock

Includes 1 Pair of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel 7 Degree, 5mm, Single Groove Race Lock

Machined Steel 7& deg

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnetic Proximity Sensor

The Magnetic Proximity Sensor will respond to pulse signals across a 1/16" air-gap between the sensor tip and disk-rotor, IRS-CV joint bolt-heads or notched brake-drum edge.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />It is useful on trans-axle setups or transmissions without mechanical speedometer cable connection.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />Using a stock GM Speed Sensor - 700R, 4L60, etc.

MAGNET KIT; FOR DRIVE SHAFT RPM; REPLACEMENT

• Tachometer Replacement Magnet Kit

Magnet Sleeve (only) for 1181 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1181 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1283 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1283 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1284 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1284 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1541 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1541 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1843 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1843 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1864A Ignitor Kit

• Replacement Magnet Sleeve for PerTronix 1864A (Service Part Only)
• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1867A Ignitor Kit

• Replacement Magnet Sleeve for PerTronix 1867A (Service Part Only)
• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1868 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1868 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for MA-141 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix MA-141 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (replacement) for FLAME-THROWER VW Cast 4 cylinder Distributor

• Replacement Part (only) for PerTronix Flame Thrower Distributors

Magnum 7.150" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.15" Long, .08" Wall, 5/16" Diameter Pushrod Set 12

The Magnum 5/16" and 3/8" pushrods offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.295" Long, .080 Wall, 5/16 Diameter Pushrod - Set of 16

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Rocker Stud Set w/ 7/16" Base Thread and 7/16" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Main Cap Nut for RHS Millet Main Caps

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.