Performance Parts

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.600" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator - 1.635" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 100 - 1.450" OD, .570" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 100 - 1.550" OD, .570" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 100 - 1.550" OD, .570" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 12 - 1.300" OD, .570" ID, .060" Thickness

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness - Set of 12

ID Spring Locator Set of 16 - 1.510" OD, .630" ID, .060" Thickness

ID Spring Locators for 26120

ID Spring Locator Set of 16 - 1.600" OD, .570" ID, .060" Thickness

Spring seats for #26055 with .570" guide.

Ignition Brass Open Barrel Kit Terminal kit (326pcs). Contains Ring and Spade terminals; Female and Male Bullet Connectors; for 22-12 AWG wire;PVC covers for terminals;

• 326 Piece Kit
• Insulation Material: PVC Clear
• Wire sizes from 12 - 22 AWG

Ignition Connector kit (150pcs). Contains #6 spade terminals, Butt connector, #6&#8 ring terminals,Female and Male disconnectors for 22-14 AWG wire

• 150 Piece Kit
• Material for Ring and Spde Terminals: Tin Plated Copper
• Wire sizes from 14 - 22 AWG

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

Ignition Insulated Terminal kit (175pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects for 22-10 AWG wire(Red,Blue,Yellow)

• PVC Insulated Terminals
• Temperature Rated -10° C to 105° C (-14° to 221° F)
• Wires sizes from 10-22 AWG

Ignition Wire Marker - 8mm - 8.8mm

Identify your wires to eliminate firing order errors.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Inner Bearing Cone-10;000 lbs. Axles

• Industry Number 387A
• Pairs With Inner Bearing Race
• 10000 lbs. Weight Capacity

Inner Bearing Cone-3;500 to 4;400-lb. Axles; 8 Pack

• Compatible With 3500 lbs Axles
• Pairs With Bearing Race No.L68111
• Compatible With Most Competitor Trailer Axle Hubs

Inner/Outer Bearing Cone-2;000 to 3;500-lb. Axles

• Industry Number L44649
• Pairs With Bearing Race PN[L44610]
• 1-1/16 in. Shaft Diameter

Inspection Cover - BB Mopar

• Inspection or Dust Cover
• Powder-coated black steel
• Included with LK6000K

Intake Valve for #60929 & #60189 Cylinder Heads

The Edelbrock #9640 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97040 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60379 Cylinder Heads

The Edelbrock #9768 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare fitting 7/16-24 for 3/16 inch line

• Manufactured to OE specifications