Performance Parts

AutoCross Gray 2-5/8" Full Sweep Water Temp Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

FITTING; THERMOCOUPLE COMPRESS; 1/4in.; 1/8in. NPTF MALE; STAINLESS; INCL. WELD

• Incl. 1/4 in. Thermocouple Compression Fitting to 1/4 in. NPMT
• Incl. 1/8 in. NPFT Bung
• Manufactured From High Carbon Steel

GAUGE; WATER TEMP; 2 1/16in.; 300deg.F; STEPPER MOTOR W/PEAK/WARN; WHT/CHRM; SPE

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

MODULE; DIMMING CONTROL; FOR USE WITH LED LIT GAUGES (UP TO 6)

• Black Composite Case
• .250 in. Control Shaft; Knob Not Included
• Incl. 4 ft. Wiring Harness

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro-Lite 350 Hose - Size 16 - Sold By The Foot up to 50'

• Sold per foot

Protect-A-Boot and Wire Kit Blue 8 Cylinder 010732

• 25 Hi-Temp Shrink Tubes
• 8 Protect-A-Boots
• Available In 5 Colors

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

SS4 Brake System Rear

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor

2 3/4" Fuel Bowl Screws Pro Series Bowls (1/4" Hex Head) 5-18

• Plated to resist corrosion

0.250 Fire Rated Hose - 8ft

.250 FIRE RATED HOSE-8FT

1000 Universal

• Requires Only two Measurements To Determine Kit
• Easy To Install With Fully-Illustrated Installation Manual
• 3.00 Min. Diameter And 5.50 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 4.50 Min. Diameter And 10.00 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 5.50 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 8.50 Max. Length

10 Degree, 11/32", Single Groove Lock w/o Lash Cap Recess

This Steel Super Lock without a lash cap recess features a 10& deg

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Titanium Retainer Set of 12 for 1.437"-1.500" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 12 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg