Performance Parts

Set of 16 PTFE Valve Seals for .500" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

Set of 8 Hardened Lash Caps w/ 3/8" Valve Stem, .190" Head Height

Includes 8 Hardened Lash Caps: 3/8 Stem Size, .190" Head Height, .080" Thickness.

SG Series 2-1/8" Fuel Level Gauge (240-33 Ohm)

• SG Series 2 1/8"
• Fuel Gauge 240-33 OHM
• Curved Glass Lens

SHIFT LIGHT; 5 RED LED; BLACK; INCL. PEDESTAL MOUNT; FOR RACE USE ONLY

• Universal Shift Light For 8 Cylinder Applications
• Swivel Base Positions The Shift Light At Nearly Any Angle
• Incl. Mounting Hardware/Instructions

SHIFT LIGHT; DIGITAL W/AMBER LED; BLACK; PEDESTAL MOUNT; DPSS LEVEL 1

• Adjustable By 10 RPM Increments
• E-Z View Digital LED Display
• 12 And 16 Volt Compatible

Shrink Sleeve, Spark Plug Wires

• Also fits spark plug wires
• Shrink sleeving to protect connections

Shunt Current Sensor

• Galvanic isolation of 1000VDC
• CANbus 2.0a interface
• Highly accurate

Shut-Off Valve 3/8" NPT Female Inlet & -6AN Bulkhead Outlet

• Ideal For Drain Valve

Signature Series Crankcase Breather Cap #4413 W/ 90 Degree Vent Nipple

Edelbrock part #4413 Round Breather with 90 deg.

Silicone Vacuum Hose, Orange, 10mm x 100cm

• 100-percent silicone construction
• Measures 10mm x 100cm
• Available in multiple colors

Silver Gray 2-5/8" Air Pressure Gauge

• Pushbutton calibration
• Easy to read 2 5/8" size
• Pressure transducer included

Silver Series 2-1/8" Volt Gauge

• Silver Series
• 2 1/8" Volt Gauge
• Curved Glass Lens

Single Analog Gauge

• Analog Gauge

Single Channel In-Line LED Controller

• Modes include: Breathing Mode, Heartbeat Mode, Primary and Secondary Strobe Modes, Control Dimming Mode

Helper Spring

Single Spring

• Keeps Main Spring Seated When Suspension is Unloaded
• Available for Most Popular Spring Diameters
• Each Spring Individually Tested

Single Wire Replacement Kit- Staight and 90° Spark plug boots- Universal- Yellow

• 500 Ohms/ft Of Resistance
• 600 F Rated Silicone Jacket
• Pre And Post HEI Vehicles

Space Age Boot Protector 8in Silver

• Color: Silver
• 6" long, heat treated fiberglass
• Withstands temperatures up to 1200°F

Spark Plug Wire / Boot Shrink Tubes 12mm x 1.5" Gray 010801

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

Spark Plug Wire Sync Kit

• For cylinder per cylinder management

SPE-18483 Wire Separators

• Slider style construction
• Adjusts to any size from 11 to 15 inches
• Triple chrome plated

SPE-2518 Fuel Pressure Regulator

• Adjustable pressure range of 1 PSI to 4 PSI
• Chrome plated finish
• Made from high quality material

SPE-29518 Wire Loom

• 1/4 inch inside diameter by 10 feet long
• Made from chrome-plated polypropylene
• Pre-split for easy installation

SPE-29841 Wire Separators

• 3/4 inch inside diameter by 4 feet long
• Made from black polyethylene
• Pre-split for easy installation

SPE-4239 Wire Separators

• Helps prevent burned plug wires
• ABS construction
• Made from high quality material

SPE-4602 Wire Separators

• Heavy duty durable heat-resistant resin
• Accommodates 8 or 8.8 mm wires
• Universal design