Performance Parts

Hot Rod 2-1/8" Brake Pressure Gauge

• Small 2 1/8" hole size
• Completely electric
• Pushbutton calibration

Hot Rod 2-1/8" Transmission Temperature Gauge

• Installation hardware included

Hot Rod Series 2-5/8" Brake Pressure Gauge - Full Sweep

Quality, Service and Value are not new to us.

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HVAC Filter; 10 x 20 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 14 x 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 14 x 1, MERV 13

• Lifetime limited warranty
• Merv 13 rating
• Easy to clean and reuse

HVAC Filter; 16 x 16 x 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

Hydraulic Release Bearing Kit

• Compatible With Dot 3 And Dot 4 Brake Fluids
• Utilizes OEM (Original Equipment) Connection Point For Easy Installation
• Commonly Used For Transmission Swap Projects

ID Spring Locator - 1.285" OD, .532" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .525" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness - Single

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 100 - 1.510" OD, .570" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 16 - 1.350" OD, .515" ID, .050" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Ignition Solder and Heat seal splice kit. Contains white, red, blue, and yellow for 26-10 AWG. Waterproof, Crimpless, 2:1 shrinkage ratio, Rated up to 600V, Temp. range from -67° to 220° F.

• 40 Piece Kit
• Temperature rated at -40° C to 105° C (-40° to 221° F)
• Starting Temperature of Soldering Melt: 115° C (239° F)

Ignition Weather Pack connector kit 209 pcs. Contains 1,2,3,4, and 6 pole Receptacles; Pins and Seals for 24-10 AWG wire; and a weather pack terminal release tool

• 209 Piece Kit
• Connector has locking mechanism that align terminal and seal
• Temperature rated at -40° C to 120° C (-40° to 248° F)

INFRA RED EXTERNAL PRINTER; 12V

• Uses Standard 58mm Thermal Paper
• Incl. AC Power Adapter And 110V Cigar Lighter Power Adapter
• 6 in. x 4.5 in. x 3.5 in.

In-Line LED RGB Controller

• Modes include: Breathing Mode, Heartbeat Mode, Primary and Secondary Strobe Modes, Control Dimming Mode

Inner Bearing Cone; 10;000-lb. Axles; 6 Pack

• Compatible With 10000 lbs Axles
• Pairs With Bearing Race No.382A
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Race; 10;000-lb. Axles; 6 Pack

• Compatible With 10000 lbs Axles
• Pairs With Bearing No.387A
• Easy DIY Installation; Includes Six Inner Races

Intake Valves for #60979 Cylinder Heads

The Edelbrock #9779 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare plug 3/8-24

• Manufactured to OE specifications