Performance Parts

Hi-Tech 9.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.500" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Polylock Set for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 3/8" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16 HI-Tech Stud

Hi-Tek Universal Transmission Pan Drain Plug Kit

• Universal Fit For Most Pans
• Easy & Quick Installation
• B&M Quality

Hi-Temp Shrink Tubes 24mm x 48" 010835

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 2" (50mm) x 24" 010856

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 6mm x 200' 010838B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hi-Temp Shrink Tubes 6mm x 48" 010838

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 9mm x 200' 010832B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hold-Down, Coil Wire

The MSD Coil Wire Retainer holds the boot securely in the coil.

Hose Clamp

• Attach To Supporting Structure

Hose Separator

• 6061-T6 Aluminum
• Black Anodized
• Fits 8 AN ProClassic Hose

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Gear Select W/OD

• Hot Rod
• With Overdrive
• Curved Glass Lens

Hot Rod 2-1/8" Transmission Temperature Gauge

• Installation hardware included

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HVAC Filter; 14 x 14 x 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 14 x 1, MERV 13

• Lifetime limited warranty
• Merv 13 rating
• Easy to clean and reuse

HVAC Filter; 16 x 16 x 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

HYDRAMAT (3X15) RECT - 19MM OUTLET OFFSET

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings