Performance Parts

Hardware kit for LSA Alternator and Power Steering Accessory Drive

• Genuine Holley Quality Parts

Hardware kit for SBC Cooling Manifold

• Genuine Holley Quality Parts
• Replacement Hardware Kit for the 20-240 SBC Kit

Hardware Kit LT4 Accessory Drive Systems

• Genuine Holley Quality Parts

HD/Race Rigid 4 Pad

• "Excellence in Performance", backed by the best one-year warranty in the industry!

HD/Race Rigid 6 Pad

• "Excellence in Performance", backed by the best one-year warranty in the industry!

HD/Race Rigid 6 Pad Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

Heavy-Duty Shock Mount Kit; Fits 2-3/8in. Axle Tube

• Heavy-duty Shock Mount Kit
• Available Sizes 2.375 Or 3 in.
• Single Replacement Shocks Are Also Available

High Energy 206/206 Hydraulic Flat Cam for International Harvester 304-392

High Energy 206/206 Hydraulic Flat Cam for International Harvester 304-392.

High Energy 218/218 Hydraulic Flat Cam for International Harvester 304-392

High Energy 218/218 Hydraulic Flat Cam for International Harvester 304-392.

High Energy 5.429" Long, 5/16" Diameter Pushrod Set of 12

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.266" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.725" Long, 3/8" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 8.152" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy Polylock for 7/16" Rocker Stud

7/16" High Energy Poly Lock

High Output Data Splitter 6-Way Hub

• Includes 6 data input pigtails.

High Pressure Spring - Godzilla 7.3L Engine

• Increases oil pressure by approximately 10psi at higher RPM

High Torque Protective Worm Gear Clamp, 1.65in - 2.32 in, 10-Pack

• Securely clamps hoses, couplers, and pipes with an outer diameter from 1.65-in-2.32-in (42mm-59mm)
• High torque worm gear design allows for quick and easy tightening
• Protective inner shield ensures safe, damage free clamping of soft materials

Hi-Tech 11.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 210 Radius 8.600" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 7.350" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.750" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 8.125" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.200" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.