Performance Parts

Dual Taper 8.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.350" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.400" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.450" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.500" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Valve Spring with Damper, 1.560 OD, 1.950 IH, .760 Lift, 500 LBS/IN, SR - Set

COMP Cams' new 26953 dual valve springs are a product of innovative design and superior craftsmanship, with a lineage back to NASCAR competition.

DynaForce Starter Gear Clutch Assembly

• Fits High Torque and High Speed Starters

EAS Pressure Sensor - 0-100 psi

• 0-100 psi capable
• Easy setup through EAS
• Compatible with CTS2/CTS3

Easy Form Hardline Tubing

• Can be Polished to Shiny Copper Finish

Easy Loom Split Wire Sleeve 1.5" x 100' 010657B100

• Add A Clean And Classy Look
• Tested to 302°F/150°C
• Self-extinguishing

EFI Fuel Pressure Regulator -10 AN (180 GPH) in Black Finish

Edelbrock fuel pressure regulators #174023 are machined from aircraft quality aluminum for those who demand the best.

Elbow 45 3in O.D. T-304 Stainless Steel

• Universal 45 degree elbow
• Mandrel bent
• Use 18006 3" wide band clamps

Electric Cut-Out Replacement Dual Wiring Harness

Doug's Headers DEC6230 Electric Cut-Out Replacement Dual Wiring Harness

Electric Fan Harness & Relay Kit with 185 Degree Temperature Switch

• 30 AMP Relay
• 30 Amp Circuit Breaker
• Crimp Terminals & Hardware

Elite Breather - Side Mount

Edelbrock part #4201 Elite Series Breather is a side mount bolt on design.

Emulsion Bleed Kit

• Blank
• 0.020"
• 0.031"

Endure-X Solid Roller Lifter w/ .842" Diameter, Left Pushrod Seat

Solid Roller lifter with cutaway body with oil band and .180" left offset Pushrod seats, single lifter

Endure-X Solid Roller Lifter w/ .842" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, cutaway body with oil band, .180" left offset, single lifter

Endure-X Solid Roller Lifter w/ .842" Diameter, Right Pushrod Seat

Solid Roller lifter with cutaway body with oil band and .180" right offset Pushrod seats, single lifter

Endure-X Solid Roller Lifter w/ .842" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, cutaway body with oil band, .180" right offset, single lifter

Endure-X Solid Roller Lifter w/ .875" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .180" right offset Pushrod seat, cutaway body with oil band, single lifter

Endure-X Solid Roller Lifter w/ .904" Diameter, Center Pushrod Seat, .300" Tall

.300" Tall Roller lifter with out oil hole, centered Pushrod seat, cutaway body with oil band, single lifter