Performance Parts

Diesel Fuel Pump

• Universal design fits most applications
• Eliminates vapor lock and flooding
• For use with 5/16 inch fuel lines

Disc Brake Rotor with Threaded Cap-10;000-lb. 8 on 6-1/2in.; 5/8in. Studs; Greas

• 10000lbs Axle Capacity
• 8 On 6-1/2 in. Bolt Pattern
• 5/8 in. Stud Size

Disc Brake Rotor with Threaded Dust Cap-12K; 8 on 6-1/2in.; 5/8in. Studs; Grease

• 12000lbs Axle Capacity
• 8 On 6-1/2 in. Bolt Pattern
• 5/8 in. Stud Size

Disc Brake Rotor with Threaded Dust Cap-16K; 8 on 275 mm; M22 Studs; Grease

• 16000lbs Axle Capacity
• 17-1/2 in. Wheel Size
• M22 Stud Size

Distribution Block

• Wrench Hex for Easy Assembly & Maintenance

Distribution Block

• Wrench Hex for Easy Assembly & Maintenance

Distributor Reluctor

Replacement reluctor for MSD Distributors.

Double-Eye Leaf Spring Trailer Equalizer; 1-3/4in. Spring Width; 35in. Axle Spac

• 3 Axles
• Type 2
• 2-1/2 in. Height

DTC-30 Disc Brake Pad

• DTC-30 Compound
• Wide Temp Range
• Controllable Torque

DTC-30 Disc Brake Pad

• DTC-30 Compound
• Wide Temp Range
• Controllable Torque

DTC-60 Disc Brake Pad

• DTC-60 Compound
• High Temp
• High Torque

DTC-60 Disc Brake Pad

• DTC-60 Compound
• High Temp
• High Torque

Dual Pass/Single Row Universal Heat Exchanger (34"W/14"H/2.25"D) 55,000 BTU

Edelbrock heat exchanger part #15408 is a dual pass/single row design and delivers 55,000 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting.

DUAL SPRING, 1.550 OD, 1.900 IN, .740 LIFT, 550 LBS/IN, SUPERFINISH, SR

DUAL SPRING W/ DAMPER, 1.519 OD, 1.900 IH, .800 LIFT, 376 LBS/IN, FT/HR

DUAL SPRING W/ DAMPER, 1.560 OD, 1.950 IH, .760 LIFT, 500 LBS/IN, SR

Dual Taper 7.400" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.900" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.450" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.