Performance Parts

8 oz. Bottle of Cam and Lifter Installation Lube

Initial start-up is the most critical time in the life of any Camshaft.

GAUGE; WATER TEMP; 2 1/16in.; 100-250deg.F; ELECTRIC; Z-SERIES

• 12 And 16V Compatible
• Incl. 1/8 in. Temp Sender
• Incl. 3/8 And 1/2 in. NPT Adapters

DTC-70 Disc Brake Pad

• DTC-70 Compound
• High Temp
• High Torque

SPE-4809 Spectre Air Filter

• Fits 4 inch air cleaners
• Flame retardant
• Paper filter construction

GT Universal OBD Block

• OBD Block

Pro Classic Hose End

• Completely Reusable W Russell Pro Classic Hose
• Interchangeable w/Many Manufacturers AN male adapters
• Russell's Proven Long Taper Design

SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender
• Thread Size - 1/8 In. NPTF
• 2 in. Diameter

Fuel Filter

• Bi-Directional Filters
• Flows Up To 130 GPH
• Rated At 70-75 PSI

Throttle Cable Kit - Stainless Steel Braided

• Stainless Steel Braided - Looks Great
• Eliminate Sticky Gas Pedal
• Quick And Easy Installation

AEM DryFlow Air Filter

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

Classic Boost Display Gauge Kit

• Ideal for carbureted or EFI vehicles
• Three digit readout in center
• Brass sensor included

High Energy 7.794" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Universal Clamp-On Air Filter

• UNIVERSAL FITMENT: Designed for use on a variety of applications
• NO-HASSLE WARRANTY: 1-Year Limited Warranty
• ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as…

Heater Hose End Fitting - Straight with 1/2" NPT and 5/8" Barb

Edelbrock part #8160 heater hose end is designed to hold up to any plumbing task you have.

Proportioning Valve - Disc/Drum Brass

• Manufactured to OE specifications

Air Filter Wrap

• Made of a durable micro-screen material
• Also blocks small dirt particles
• Adds very little air restriction

Helper Spring

Single Spring

• Keeps Main Spring Seated When Suspension is Unloaded
• Available for Most Popular Spring Diameters
• Each Spring Individually Tested

Floor & Tunnel Shield II 21" x 24" 050501

• Constructed From 10 Mil Aluminum
• Just Trim Peel And Stick
• Peel and stick adhesive backing

12V HD Compressor

• 12 Volt Compressor

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

GAUGE; WATER TEMP; 2 1/16in.; 100-250deg.F; ELECTRIC; ULTRA-LITE

• 12 And 16V Compatible
• Incl. 1/8 in. NPT Temp Sender
• Incl. 3/8 And 1/2 in. NPT Adapters

Protect-A-Boot 6" Black 8-Pack 010512

• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• Double-Wall Construction For Added Durability

ProXS Muffler 2.5in Dual Inlet/ 2.5in Dual Outlet 4in x 9.5in Oval x 19in Long Body

• 2.5" Dual Inlet/ 2.5" Dual Outlet, 4" x 9.5" Oval, 19" Long Body, 24" Overall Length
• Alternate muffler with Notched necks is 400493. Use 1" wide band clamps 18325.
• Alternate muffler with Notched necks is 400493. Use 1" wide band clamps 18325.

Pro Classic Hose End

• 37 Deg. AN Flare
• 6061-T6 Aluminum
• Positive Anti-Leak Seal

Carburetor Throttle Ball Assortment

• Kit Contains Four Different Throttle Balls and Hardware.